1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

S4 manifolds onto 2.4v6 block?

Discussion in 'A4/S4 forum(B5 Chassis)' started by evzee, Jul 23, 2010.

  1. evzee
    Offline

    evzee Member

    Joined:
    Jul 3, 2010
    Messages:
    35
    Likes Received:
    0
    [Jul 23, 2010]
    I've tried a search, no joy. Anyone know if the v6 lumps match up between parts? Iv'e found, if there's truth in it, that my 2.4 valves are shared with the rs4....? hmmm.....2.4 biturbo maybe.... I'll have some of that :yes:
    #1
  2. Ads

    Ads

    [Sep 23, 2014]

  3. aragorn
    Offline

    aragorn "Stick a V8 in it!" Staff Member Moderator VCDS Map User

    Joined:
    Jan 30, 2008
    Messages:
    15,580
    Likes Received:
    314
    [Jul 23, 2010]
    I suspect that yes, the manifolds will bolt onto the cylinder head just fine. The valves arent the same, but the heads are similar afaik. People certainly use modified (as in ported, with bigger valves etc) 2.4 heads on their S4's without much trouble.

    I also suspect you'll start melting things trying to turbocharge a N/A engine, without doing something to lower the compression ratio, or being very conservative with the boost pressure.
    #2
  4. evzee
    Offline

    evzee Member

    Joined:
    Jul 3, 2010
    Messages:
    35
    Likes Received:
    0
    [Jul 23, 2010]
    Haha, yeah baby. Meltings my speciality. Although my lil mazda 1.5 turbo hasn't melted yet.:eyebrows: Bit more research needed me thinks
    #3

Share This Page