1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

S4 front bumper

951 May 11, 2007

  1. 951

    951 Member

    530
    0
    16
    Ive taken my old front bumper off to fit the s4 one but it never crossed my mind that the alloy bumper bar was different. is there anyway of converting it or will i have to get the proper one and how much are they from audi ?? The side brackets fit fine but at the moment i have the bumper cover fitted held on with tie-wraps !!
     
  2. 951

    951 Member

    530
    0
    16
    Oh and the other thing is the o/s spotlight doesnt fit in as the bulb holder hits the horns !!!
     
  3. Broken Byzan

    Broken Byzan Photographic Moderator Staff Member Moderator VCDS Map User quattro Audi A4

    13,237
    465
    83
    The A4 one can be molded in to fit i believe,Well according to the US forums. Also the 2nd horn needs to be relocated to fit the fog. I used an angle bracket bent straight to do mine
     
  4. Markey

    Markey Active Member

    2,175
    1
    38
    I used an angel grinder to cut out two sections on my old on because it would not fit over the FMIC, never had a problem other wise.
     
  5. 951

    951 Member

    530
    0
    16
    whats an FMIC ??
     
  6. Markey

    Markey Active Member

    2,175
    1
    38
    Front Mount Intercooler
     
  7. 951

    951 Member

    530
    0
    16
    The bumper cover seems to fit on the car apart from the horns. the problem is i cant get the a4 alloy bumper support to fit the s4 bumper !!
     
  8. Markey

    Markey Active Member

    2,175
    1
    38
    Cut it with a grinder :)
     
  9. 951

    951 Member

    530
    0
    16
    The bar fits the cover but doesnt line up properly so the bumper cover wont line up on the car but i may have a solution . I was in a breakers yard today and the guy there showed me some pics of an s4 avant that they are getting next week for breaking ,the bumper cover is knackered but the alloy bar didnt look like it was touched !!!
     
  10. 951

    951 Member

    530
    0
    16
    Got the bumper bar + the brackets as well so should get it done this weekend !!. Whats the going rate for an s4 facelift avant rear bumper ??
     
  11. marms

    marms Member

    833
    1
    16
    Are you absolutely sure the bumper bar is not damaged? Remember this is the main area of impact in a crash and you don't want to be messing with a damaged bar as this could seriously effect its function of absorbing an impact. If it has already been involved in an inpact then it may well not provide adequate protection in a subsequent accident.

    Just a thought
     
  12. 951

    951 Member

    530
    0
    16
    Yeah its just fine the car was hit mainly in the wheel/door area so only damaged the side of the plastic bumper cover !!!
     
  13. SteveS

    SteveS S6 avant

    691
    0
    16
    you will need the proper s4 beam to fit the bumper properly. the a4 one is too different. i did have pics of them both from when i did mine but ive deleted them now. :sorry:
     
  14. 951

    951 Member

    530
    0
    16
    I have the beam and the different bumper shocks which is what i bought off the damaged car as i have a good pu cover already ,all i need now is one bolt to hold the beam on now !!
     
  15. SteveS

    SteveS S6 avant

    691
    0
    16
    i had to get longer bolts when i did mine, they are only M8 thread ones and are cheaper from a fixings supplier than audi.
     
  16. 951

    951 Member

    530
    0
    16
    Ive needed afew other bits so i ordered one of audi,it cost about £1.80 !!
     

Share This Page