As per title does a s4 exhaust fit the 1.8 tqs, obviously i'll have to custom make the downpipe section but there's one on AudiSRS.com :: s4 (B5) facelift manifolds / downpipes and stainless system
S4 EXHAUST ON 1.8TQS
- Thread starter jamie226bhp
- Start date
I have an s4 rear exhaust on mine.
I cut it just behind the "y" and made my DP to meet it, sounds nice
I cut it just behind the "y" and made my DP to meet it, sounds nice
Yep,lol
I bought a used S4 system and fitted that , was £50 to my door iirc, made up the DP etc and i had a working exhaust for about £100.
I bought a used S4 system and fitted that , was £50 to my door iirc, made up the DP etc and i had a working exhaust for about £100.
just saw this thread on 'srs'
the exhaust looks superb,but am abit dubious whether it is a miltek or not.
on my system,each of the three sections have a 'miltek' plate and code welded to it,and seeing as its in very good clean condition,there are no 'miltek' logos on either tailpipe.
mines been on for around 9years and logos are still there.
£300 is alot to pay out if its not the real 'mcoy'
the exhaust looks superb,but am abit dubious whether it is a miltek or not.
on my system,each of the three sections have a 'miltek' plate and code welded to it,and seeing as its in very good clean condition,there are no 'miltek' logos on either tailpipe.
mines been on for around 9years and logos are still there.
£300 is alot to pay out if its not the real 'mcoy'
- Joined
- Jan 30, 2008
- Messages
- 18,708
- Reaction score
- 909
- Points
- 113
- Location
- Glenrothes, Fife, Scotland
Its only viable imo if you do what marks done.
no point paying £300 for an S4 system then cutting it to pieces, just get a custom system made to fit properly.
no point paying £300 for an S4 system then cutting it to pieces, just get a custom system made to fit properly.
