1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

S3 turbo exhaust flange stainless steel

s3joe Jan 9, 2014

  1. s3joe

    s3joe Active Member

    582
    92
    28
    This might be strange request but I am after a stainless flange to make a downpipe for my s3 so can anyone point me run the right direction
     
  2. BENJAMIN

    BENJAMIN Active Member

    503
    93
    28
    Contact Nando at Bam racing dude. He does these, used their ko4 flange myself.
     
    s3joe likes this.
  3. sliced

    sliced Drive safe, stay alive.

    1,568
    335
    83
    haha flange :blink:
     
  4. olethalb

    olethalb Active Member

    357
    77
    28
    Bought one off ebay, make sure you get a decent thickness item

    Just search 'k04 flange'
     
    s3joe likes this.
  5. s3joe

    s3joe Active Member

    582
    92
    28
    I'll try bam racing as there is none on eBay thanks lads
     
  6. olethalb

    olethalb Active Member

    357
    77
    28
    i bought one last week bud, let me check item number...
     
    s3joe likes this.
  7. olethalb

    olethalb Active Member

    357
    77
    28
  8. s3joe

    s3joe Active Member

    582
    92
    28
    Nice one did you get the bend off them or did you pull it yourself
     
  9. olethalb

    olethalb Active Member

    357
    77
    28
    bend?

    i'm making a 3.5" stainless decat and 3" down pipe - they are 2 seperate things on the A4 but still require a lot of parts, straigts, angles, flexi section, lambda bosses and i'll be dropping and EGT sensor / boss on mine from beach buggy turbos

    i've made a few down pipes in the past and try and get all the bits i can from MIJ exhausts on ebay as they seem to have decent quality stuff reasonably priced.

    i'm waiting for 1 more bend and some heatwrap from MIJ (should arrive today) then can set about mocking up a set up.

    the k04 flange ID is 3.5" btw :)
     
  10. s3joe

    s3joe Active Member

    582
    92
    28
    O have got a company to make mine but they have not got the flange to do it so they are going to pull all the bends and angles
     
  11. olethalb

    olethalb Active Member

    357
    77
    28
    oh i see - hope it turns out well, pop some pics up once done
     
  12. s3joe

    s3joe Active Member

    582
    92
    28
    I will do
     

Share This Page