1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

S3 offsets???

A4_MO Nov 25, 2012

  1. A4_MO

    A4_MO Member

    39
    0
    6
    Hi my friend has a 58 plate s3 and has found some porsche 911 turbo alloy he wants fronts are 19x8.5 et56 an rears are 19x9.5 et52 so just wondering what size adaptors he would need for slight tuck on front and flush or a little poke on rear,also what tyre sizes would u run?he is on ap coilovers too.thanks
     
  2. MartayMcFly

    MartayMcFly Booooooost VCDS Map User Gold Supporter

    2,763
    354
    83
    N8'll put you right. Will likely need spacers on both.
     
  3. crunchie

    crunchie Active Member

    880
    77
    28
    Front inner clearance - 15mm LESS
    Outer position - EXTEND an extra 11mm

    Rear inner clearance - 23mm LESS
    Outer position - EXTEND an extra 27mm

    According to Wheel Offset Calculator

    Looks like a no go to me. You MAY get away with 4 x fronts with the correct adapters.

    Good luck.
     
  4. N8

    N8 Kowalski Details VCDS Map User

    17,163
    718
    113
    Gen Turbo Alloys 997, will be 11J rear. 4 x fronts, 15mm adapter, 215/35 and it'll fit/work.
     

Share This Page