1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

s3 brakes on a4 ?

Discussion in 'A4/S4 forum(B5 Chassis)' started by olds_kool, Sep 14, 2010.

  1. olds_kool

    olds_kool Active Member
    VCDS Map User

    Joined:
    Jul 21, 2007
    Messages:
    1,089
    Likes Received:
    11
    does anyone know are the caliper carriers the same on an s3 as a tt

    and would the calipers fit with b6 a4 312mm discs

    cheers
     
  2. Advert Guest Advertisement


  3. aragorn

    aragorn "Stick a V8 in it!"
    Staff Member Moderator VCDS Map User

    Joined:
    Jan 30, 2008
    Messages:
    17,761
    Likes Received:
    673
    Yep should be the same part.
     
  4. Kingfisher

    Kingfisher Member

    Joined:
    Jan 7, 2003
    Messages:
    220
    Likes Received:
    24
    Did this mod about 4 years ago (?) as the standard pads/discs needed replacing anyway.
    I actually used new discs, listed as fitting the A6 at Euro, but they must be the same as the B6 A4.
     
  5. olds_kool

    olds_kool Active Member
    VCDS Map User

    Joined:
    Jul 21, 2007
    Messages:
    1,089
    Likes Received:
    11
    guessing you mean carriers with original calipers?
    bought some s3 calipers/carriers on ebay as i couldnt find tt ones so was hoping they are the same but id like to use the s3 calipers if i can as my tdi has 200k + so everythings a bit worn

    how much did you pay for discs
     
  6. aragorn

    aragorn "Stick a V8 in it!"
    Staff Member Moderator VCDS Map User

    Joined:
    Jan 30, 2008
    Messages:
    17,761
    Likes Received:
    673
    I'd check very carefully before using the S3 calipers, as they probably have different size pistons.

    A4's use a 57mm piston, but the TT ones are 54mm, which would probably completely negate any advantage fitting the larger disk and could quite easily make the braking worse.

    Then disks you need are fitted to later A6's and B6 A4's with big engines.
     
  7. Kingfisher

    Kingfisher Member

    Joined:
    Jan 7, 2003
    Messages:
    220
    Likes Received:
    24
    yes what aragorn says !
    I didn't bother to look into caliper sizes as I was just after a simple mod, needed new bits anyway and my B6 came with 312mms from the factory.
     

Share This Page