1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

s-line lower front, grilles won't fit???

jbcalvin May 1, 2011

  1. jbcalvin

    jbcalvin Member

    691
    21
    18
    Evening guys,

    Just spent today fitting a s-line lower front to my standard bumper, following the thread detailing how to and what to cut etc.....

    The problem I have is the 2 side grilles bought from Audi at the same time wont clip into place?

    It looks like they are too small and have nothing to clip in to...

    Any suggestions?

    Cheers
     
  2. quattrojames

    quattrojames Moderator Staff Member Moderator Audi A6 Audi Avant Owner Group

    14,060
    583
    113
    You're trying to fit "S-Line grilles" into an S-Line lower valance ...... ?

    Which of these grilles have you got?

    [​IMG]
     
    Last edited: May 1, 2011
  3. jbcalvin

    jbcalvin Member

    691
    21
    18
    Hi quattrojames,

    I have grilles 4 and 9 from the diagram, I did ask the guys at the dealer to ensure the grilles were correct for the valance.....

    I take it I should have 3 and 8?

    Cheers again

    Steve
     
  4. CMD

    CMD Pointing Forward's!!!!!!!!!

    3,015
    17
    38
    4-9 are the correct grills for the S-Line lower so they should fit. The standard bumper (top part) may not have the locating lug's so you may have to bond them in.
     
  5. quattrojames

    quattrojames Moderator Staff Member Moderator Audi A6 Audi Avant Owner Group

    14,060
    583
    113
    The S-Line grilles are all the same fit I think, it's just whether they're 'open' or 'closed' design which varies, and that depends on engone/transmission options I think.
     
  6. jbcalvin

    jbcalvin Member

    691
    21
    18
    Bugger,

    last thing I wanted to do was bond them in as they need to be removed if you need to change fog light bulbs, or remove the bumper anytime in the future...

    Still seems strange that they dont even look the right size though, seems to be too much of a gap all round compared to the fit of my standard grilles/valance....

    Will try and source an s-line top section to see if that helps....

    Cheers guys
     
  7. hades-

    hades- Well-Known Member VCDS Map User

    9,481
    646
    113
    have you fitter the lower correct

    take a pic lets see
     
  8. quattrojames

    quattrojames Moderator Staff Member Moderator Audi A6 Audi Avant Owner Group

    14,060
    583
    113
    Send a PM to fourcircle, off the top of my head he is the first person I can think of who fitted an S-Line lower to a standard top bumper and used S-Line fog grilles too.
     
  9. hades-

    hades- Well-Known Member VCDS Map User

    9,481
    646
    113
    iv fitter 4/5 and never had a problem with the grills
    i always got the lil black clips to that they screw in with
    is his have gaps i recon its not fitted how it should be
     
  10. jbcalvin

    jbcalvin Member

    691
    21
    18
    Bez101,

    What black clips are you talking about? This may be the problem I have.....
     
  11. hades-

    hades- Well-Known Member VCDS Map User

    9,481
    646
    113
    theres small clips that hold them in
    like a black M shape with a screw through it
     
  12. simon.m

    simon.m Active Member

    2,747
    6
    38
    put a photo up so every one can see what your talking about ie the big gap :)
     
  13. ASHIHARA

    ASHIHARA Member

    294
    15
    18

Share This Page