1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

S-Line Badge on an RS4 Grille

Wrath Feb 19, 2011

  1. Wrath

    Wrath Well-Known Member

    1,196
    41
    48
    Latest addition to my car, managed to fit an S-Line badge onto my RS4 grille:
    [​IMG]
     
  2. S4twiggy

    S4twiggy Fully Certified Detailer!!

    1,815
    9
    38
  3. razza1

    razza1 Well-Known Member

    3,042
    803
    113
    snap :)
     
  4. Wrath

    Wrath Well-Known Member

    1,196
    41
    48
    Couldn't find the thread that started me thinking about it. Finally done it. Cheers razza.
     
  5. dubdemand

    dubdemand VAG Addict

    405
    8
    18
    Looks pretty good although is it maybe a bit wonky? Can't really tell due to the angle of the picture!?!
     
  6. razza1

    razza1 Well-Known Member

    3,042
    803
    113
    always happy to help lol! :D
     
  7. Wrath

    Wrath Well-Known Member

    1,196
    41
    48
    It's the angle of the picture, took the pic from my front door and the drive is angled.
     
  8. icenutter

    icenutter Member

    596
    0
    16
    Do the RS4 grills go straight into the S-Line bumper?
     
  9. dubdemand

    dubdemand VAG Addict

    405
    8
    18
    yes
     
  10. Ash B

    Ash B Well-Known Member

    5,831
    83
    48
    Wrath looks sweet, any more photos your car? Looks lovely
     
  11. Wrath

    Wrath Well-Known Member

    1,196
    41
    48
    Cheers mate. Here are some older pics:

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  12. icenutter

    icenutter Member

    596
    0
    16
    Love your car!

    Is that an LCR splitter at the front?
     
  13. Wrath

    Wrath Well-Known Member

    1,196
    41
    48
    Cupra R splitter sprayed satin black.
     
  14. yavz

    yavz New Member

    28
    0
    1
    Beautiful. Just beautiful.
    What else do you have planned?

    Does the standard S-line numberplate holder go onto the RS4 Grill?

    Thanks,
     
  15. Ash B

    Ash B Well-Known Member

    5,831
    83
    48
    Looks sweet fella, defo like the front end. Looks very fresh and clean.
    As said any more plans? :)
     
  16. Wrath

    Wrath Well-Known Member

    1,196
    41
    48
    Cheers mate. It's nice to have others appreciate my car :)

    Yes, the plate holder does fit. I carbon wrapped mine as the S-line holder is slightly anthracite in colour whereas the grill is black.

    I'm going to put some clear corner lights on, was going to do that this evening but it's raining! Also going to try and put a 2010 sat nav, just need an old RNS-e faceplate.
     
  17. Wrath

    Wrath Well-Known Member

    1,196
    41
    48
    Cheers mate :)

    I do like the Audi red but it seems a relatively uncommon colour for Audi's.

    I'm aware that I've spent a reasonable amount of time and money on my car so really should get some more work done on the house before "the wife" starts complaining.

    I was going to retrofit the umnitza halo's but I can't see them staying put with our UK roads.
     
  18. Mike_R

    Mike_R New Member

    21
    0
    1
    Hi wrath,

    am also. On the look out for an rnse. Where are u planning on getting yours from. Ive seen a few on ebay but still thinking about them.

    when u say 2010 sat nav, do you mean standard rnse but 2010 sat nav disk.

    the car is lovely. Great colour
     
  19. Mike_R

    Mike_R New Member

    21
    0
    1
    Hi wrath,

    am also. On the look out for an rnse. Where are u planning on getting yours from. Ive seen a few on ebay but still thinking about them.

    when u say 2010 sat nav, do you mean standard rnse but 2010 sat nav disk.

    the car is lovely. Great colour
     
  20. Wrath

    Wrath Well-Known Member

    1,196
    41
    48
    Cheers Mike. Managed to install my clear corner headlights yesterday and shredded my hands trying to reduce the bumper gap. I'll take some shots when the weather is a bit better.

    I am intending to get a 2010/2011 RNS unit (not just the disk) as it has a higher res screen and can accept SDHC cards. Was going to get one off ebay.
     
  21. ShibbySi

    ShibbySi New Member

    10
    0
    1
    How much should I expect to pay for the RS4 grill and the fog grills? Where did you buy them from? Ebay?
     
  22. Triple.O.G

    Triple.O.G Active Member

    1,113
    5
    38
    The grill alone is £200 from Audi, £220 for a black optics one.

    Ebay roughly £120 but you have to keep looking as theres not many.
     
  23. Richardesty

    Richardesty loves quattro

    742
    20
    18
    I'm really liking this Nathan, and have often wondered about breaking my RS6 grill up a bit with a quattro badge.

    How did you fit it?
     
  24. Wrath

    Wrath Well-Known Member

    1,196
    41
    48
    I've finally prompted you to post, wahey! Welcome back :salute:

    Not sure about the quattro badge, pretty sure it will fit the RS4 plate. I purchased an S-Line badge that came with 3M tape ready to use, purchased an RS4 grille badge. Heated up the RS4 lettering with a hair dryer, removed them and stuck the S-Line badge to it.

    The RS4 badge fits into the mesh and just clips on. It did come with a metal clip but I couldn't fathom where it fit so left it.
     
  25. Wrath

    Wrath Well-Known Member

    1,196
    41
    48
    Yeah! Managed to buy a B7 RNS-e faceplate so when I have some cash I'll get an A3 2010/2011 RNS and retrofit it. Those faceplates are like hens teeth!
     
  26. Triple.O.G

    Triple.O.G Active Member

    1,113
    5
    38
    Why do you need a seperate faceplate to fit an A3 RNSE? are the A3 ones different?

    Will you still have the higher pixel display if your putting an A4 facplate on it?
     
  27. Richardesty

    Richardesty loves quattro

    742
    20
    18
    A man after my own heart - nice one buddy!!!!
     
  28. Wrath

    Wrath Well-Known Member

    1,196
    41
    48
    Yep, the A3 ones have a different faceplate so I'd have to swap that over, it's only a piece of plastic but extremely difficult to get hold of on their own.

    It would keep the higher pixel display.
     

Share This Page