1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

RS6 style wheels - what ET?

jbcalvin May 5, 2011

  1. jbcalvin

    jbcalvin Member

    691
    21
    18
    Looking to upgrade my standard wheels for RS6 style one's..

    Have seen a few for sale on flea bay, but with massively differing offsets, if I remember correctly the right offset for A4 is ET42 (no doubt I'll be corrected if this wrong) but what difference would say an ET54 make?

    ET54 seems to be standard for the A3 models, I will probably be getting coliovers soon as well, so don't want to go down the road of wheels being too far out/having to fit spacers/having rubbing issues...

    All advice/assistance gratefully received as usual...

    Cheers

    Steve
     
  2. hades-

    hades- Well-Known Member VCDS Map User

    9,482
    646
    113
    try to get as near at 42 as you can
    54 will pull them in
     
  3. AudiLeon

    AudiLeon Well-Known Member VCDS Map User

    2,250
    192
    63
    Maybe even abit lower than 43. I run 33 on the rear and it fills the archs lovely.
     
  4. hades-

    hades- Well-Known Member VCDS Map User

    9,482
    646
    113
    i run 35 on my 20" and my new 18"s are 35 fill arch just right no need for spacers
     
  5. quattrojames

    quattrojames Moderator Staff Member Moderator Audi A6 Audi Avant Owner Group

    14,068
    585
    113
    I'd agree with that, all A4 RS style wheels came ET43, anything any higher (from A3's) and you'll need 20mm + spacers (too much imo), there are plenty of Ronals with ET43 about. If you then put 10mm spacers all round it will look great!
     
  6. jbcalvin

    jbcalvin Member

    691
    21
    18
    Cheers guys....
     

Share This Page