1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  1. Danielson

    Danielson Member

    704
    0
    16
    hi to all, ive just ordered some rs4 replicas for my a4, got em from rochford, very good service, will post pics when they arrive. /ubbthreads/images/graemlins/groovy.gif
     
  2. Danielson

    Danielson Member

    704
    0
    16
    ive ordered 225 40 18s, i very much doubht u r running 19s with a 50 profile??
     
  3. AndyMac

    AndyMac Moderator Moderator

    9,832
    46
    38
    Unless you've got hydraulic suspension, like a Monster truck.
     
  4. jimboA3

    jimboA3 Member

    336
    0
    16
    [ QUOTE ]
    snoop said:
    i went 4 et35 in the end, i/we (yaseen) looked into it and everything pointed to et35 as they push the wheel out furter, hope this makes sense, im getting them from rochford where i presume yours came from originally, looking at the centre caps.

    [/ QUOTE ]

    ET 30's will push the wheels further out than et35's. the lower the offset the further out the wheels will sit - i know this as im running et 22's on my a3
     
  5. imported_Yaseen

    imported_Yaseen Guest

    0
    0
    0
    yup, the lower the offset the more outwards the wheel is (oem rs4 is et20 to fill arches) and the diff is in mm

    But EVERYTHING I have read points to ET35 looking being preffered!!

    http://forums.audiworld.com/a4/msgs/1885415.phtml
    http://www.audizine.com/forum/showthread.php?s=&threadid=18458&highlight=et30+rs4
    http://forums.audiworld.com/a4/msgs/1647646.phtml
    http://www.achtuning.com/shop.asp is one of the largest and most popular place where americans get them nd they do et35
    http://forums.audiworld.com/a4/msgs/1736503.phtml
    http://forums.audiworld.com/a4/msgs/1999558.phtml
    http://forums.audiworld.com/a4/msgs/1885415.phtml
    http://forums.audiworld.com/a4/msgs/1578066.phtml


    A few months ago I asked Rochford to get me et35, they couldnt as they just did et30, now they do /ubbthreads/images/graemlins/smile.gif

    I did advise you to read all the above and make your own decision- but relax /ubbthreads/images/graemlins/beerchug.gif Although this car badly needs to be dropped and new caps- Look at the pic in the link below & tell me these don't look good- if they don't i'll take em off your hands /ubbthreads/images/graemlins/wink.gif

    http://forums.audiworld.com/a4/msgs/1578066.phtml
     
  6. excursion

    excursion Member

    740
    0
    16
    You guys span me out there for a minute. I know I couldn't have managed even a 5mm difference in offset as my wheels were really filling the arches, so I did wonder how you were going to pull off an extra 5mm /ubbthreads/images/graemlins/wink.gif

    35mm is the recommended offset for the B5, I was pushing it a bit with 30 but it looks spot on.
     
  7. Danielson

    Danielson Member

    704
    0
    16
    im happy with the choice i have made, dave just rang me, he said the new replicas hes just received are the best yet and they come with silver caps not that chrome effect, which i really dont like, roll on tuesday and i will get some pics up.
     

Share This Page