Separate names with a comma.
Discussion in 'Audi S4/A4/A4 Cab (B7 Chassis)' started by chrisa4quat, Apr 15, 2013.
A relay or anything or is it ok to just be wired straight in? Thanks
Log in or Sign up to hide this advert.
you first Chris, if it works I'll have a go lol, just put it on my "to do" list
I've already done it Carl but the button failed. I was wondering if it was something I have or haven't done or whether its just a faulty button
Not sure if this helps but I've had this eBay item in my watch list for ages:
At the bottom of the description there are two links to some install instructions.
Hope that helps
There looks like a relay there? I have both the instructions thank you buy nowhere does it state having a relay
i used a richbrook one in mine as i fitted it to my B6 flip over cigar lighter
the DTM loom is a bit more old school with starter wire so i'd advise a relay or you'll be having full current going through the switch / button on cranking
you can use this as it's pretty close to our set up
Google Image Result for http://lh3.ggpht.com/taplive/SE3-Lz0ay4I/AAAAAAAABcI/1AJLDDaE9VA/s800/Starter%20Button.JPG
and here's mine