1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

RNS-e Faults shown up

DaztheGuv May 20, 2011

  1. DaztheGuv

    DaztheGuv Member VCDS Map User

    92
    1
    6
    I've just fitted a rns-e to my 07 plate S3, which has audi phone prep, iPod multifunction steering wheel and Bose. Swapped the Bose wire, vagcom'd it and I'm getting a lack of bass, and the following fault codes.

    16 Steering wheel malfunction 0010
    19 Can gateway malfunction 0010
    37 Navigation 0011 not registered
    52 Door electric passenger malfunction 0010
    56 Radio malfunction 0010

    Is there anybody who can help me solve these problems?

    Thanks,

    Daz
     
  2. Lewis583

    Lewis583 Active Member VCDS Map User

    956
    91
    28
    Did you code it in?
     
  3. DaztheGuv

    DaztheGuv Member VCDS Map User

    92
    1
    6
    Yes coded it with 020717, is that the right code?
     
  4. warren_S5

    warren_S5 Moderator Staff Member Moderator VCDS Map User

    7,210
    2,480
    113
    Some sites that can help you out:

    VAG Codes for RNS-E | Audi Forum

    http://www.audi-sport.net/vb/new-a3-s3-sportback-8p-chassis/67896-converting-symphony-ii-antenna-system-use-rnse.html

    Have you set the welcome screen to S3 one? If not check in here (Below):

    Full list of codes here: link

    I'd say your coding should be:

    {Instrument Cluster}

    Control Module Coding

    Select 56 (Radio System)
    Coding -> Function 07



    0:
    2: Audi S3 (8P)
    0: Malfunction diagnosis for front loudspeakers active
    9: Sound System
    7: Base plate diagnostic capable with comfort control
    1: No additional Tuner
    7: CD-Changer and Multi-Function Steering Wheel installed

    so 0209717

    Then you need to change:

    Control Module Adaptation

    Select 56 (Radio System)
    Adaptation -> Function 10

    -> Channel 001 (Tire Circumference)
    The tire circumference is beeing adapted in "mm", a tire circumference table can be found here.

    {Tire Circumference Table}

    Summer Tires

    1790 - 145/80 R14
    1815 - 165/65 R15
    1803 - 175/60 R15
    1806 - 185/50 R15
    1935 - 195/65 R15
    1910 - 205/60 R15
    1930 - 205/55 R16
    1818 - 205/40 ZR17
    1960 - 215/55 R16
    2060 - 225/60 R16
    1930 - 225/45 R17
    2074 - 225/55 R17
    1943 - 225/40 ZR18

    -> Channel 002 (Wheel Pulse)
    The wheel pulse describes the amount of wheel pulses per tire revolution. If value 0 is entered the system calibrates automatically itself after several kilometers and inputs a value.

    43 - Audi A3 (8P)
     
    Last edited: May 21, 2011
  5. DaztheGuv

    DaztheGuv Member VCDS Map User

    92
    1
    6
    Thanks for that,

    Done all those what you suggested, and still had a lack of bass, and fault codes, put bose pin back in and now I have thumping bass, albeit with the fault codes. Any other ideas? Or have you any idea what colour the bose wire is? Just wondering if it was actually wired correctly?

    Are there any other wires that may need moving?
     
  6. warren_S5

    warren_S5 Moderator Staff Member Moderator VCDS Map User

    7,210
    2,480
    113
    I'm sure Bose wire was brown; I'll check... I wonder if in different year models of car the loom is different (our is 2007)
     
  7. warren_S5

    warren_S5 Moderator Staff Member Moderator VCDS Map User

    7,210
    2,480
    113
  8. DaztheGuv

    DaztheGuv Member VCDS Map User

    92
    1
    6
    Thanks for all your help Warren, much appreciated! :) you're a star! A prince amongst men.
     
  9. NHN

    NHN Retrofitter - Audi - VW - Skoda - Seat Site Sponsor VCDS Map User

    29,272
    1,685
    113
    List the actual faults as those logs are useless to anyone on here, we need to know what each module fault is advising please in order to advise you, as atm we're speculating what the issue is.
     
  10. DaztheGuv

    DaztheGuv Member VCDS Map User

    92
    1
    6
    The fault is as expected: Radio ZF Output to Antenna

    Thanks, for you help guys!

    Daz.
     
  11. NHN

    NHN Retrofitter - Audi - VW - Skoda - Seat Site Sponsor VCDS Map User

    29,272
    1,685
    113
    Well according to your 1st post, that wasnt the sole error tbh, nav wasnt even enabled in Can gateway, but seems you've sorted it now, just the antenna issue.
     
  12. DaztheGuv

    DaztheGuv Member VCDS Map User

    92
    1
    6
    Oops - Just found another :-(

    Can Gateway

    1 Fault Found
    01044 Control Module Incorrectly Coded

    How can this be done?

    Just shown up!
     
  13. NHN

    NHN Retrofitter - Audi - VW - Skoda - Seat Site Sponsor VCDS Map User

    29,272
    1,685
    113
    Fella we cant help you without posting the logs of the faults & current coding, that doesnt help us at all apart from telling us its not coded correctly, we need to know what the coding is in order to determine the issues.
     
  14. FOX1980

    FOX1980 Foxy

    148
    3
    18
    Just swapped my mk1 RNS-E for a mk2 which I purchased from jarastech on Ebay, before I recoded it, it showed a catalogue of fault codes, once I coded it to my car the codes were still there however I cleared the codes and it went back to just the antenna fault (which everyone gets with the non rns-e antenna). Does anyone know if this is normal.
     
  15. NHN

    NHN Retrofitter - Audi - VW - Skoda - Seat Site Sponsor VCDS Map User

    29,272
    1,685
    113
    Yes
     
  16. FOX1980

    FOX1980 Foxy

    148
    3
    18
    Thanks again Nigel
     
  17. DaztheGuv

    DaztheGuv Member VCDS Map User

    92
    1
    6
    Address 19: CAN Gateway Labels: 1K0-907-530.lbl
    Control Module Part Number: 1K0 907 530 K HW: 1K0 907 951
    Component and/or Version: J533__Gateway H12 0170
    Software Coding: FD0F03C007000101
    Work Shop Code: WSC 06314 000 00000
    VCID: 2F660F3881475A64
    1 Fault Found:
    01044 - Control Module Incorrectly Coded
    000 -- -
    Freeze Frame:
    Fault Status: 01100000
    Fault Priority: 1
    Fault Frequency: 1
    Reset counter: 179
    Mileage: 43524 km
    Time Indication: 0
    Date: 2011.05.22
    Time: 12:20:10
    Does this help?
     
  18. DaztheGuv

    DaztheGuv Member VCDS Map User

    92
    1
    6
    0209717 is the code
     
  19. DaztheGuv

    DaztheGuv Member VCDS Map User

    92
    1
    6
    Bose sound, mfsw, telephone connectivity, iPod, cruise control, rns-e
     
  20. yuan2211

    yuan2211 Member

    147
    3
    18
    i had similar codes up just trial and error really but i remember the not registered ones were registered by i think by marking it in the installation list in central convenience or can gateway.
     
  21. BlueSpark

    BlueSpark 6th Gear

    386
    6
    18
    Have you enable "Navigation" in the CAN Gateway module? If not then i would start there.
     
  22. NHN

    NHN Retrofitter - Audi - VW - Skoda - Seat Site Sponsor VCDS Map User

    29,272
    1,685
    113
    Without a doubt something is either not ticked in the gateway long coding that should be or something is ticked that shouldnt be, given nav states not registered in the 1st post, this would as already suggested be a good place to start.
     
  23. DaztheGuv

    DaztheGuv Member VCDS Map User

    92
    1
    6
    Thanks again everyone, but still having problems,

    Gone in to can gateway coding, tick off what I need, and untick what I need, click do it and nothing happens. Grrrr, am I doing something wrong?
     
  24. DaztheGuv

    DaztheGuv Member VCDS Map User

    92
    1
    6
    Sorted!! :thumbsup::thumbsup::thumbsup:
     
  25. vw754

    vw754 vorsprung Durch Technik

    2,314
    58
    48
    i have bluetooth...........mfsw whats my code going be?
     

Share This Page