1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

RNS-E = AUX or LINE IN help/advice/wisdom needed.

kevin00 Mar 9, 2013

  1. kevin00

    kevin00 New Member

    19
    0
    1
    Hi All,

    I have searched through this forum and even found an area where it mentions
    "everything" RNS-E from installs to Mods HOWEVER I still cannot find in plain
    english how or what I need to buy to be able to plug in a 3.5mm Headphone plug
    so that I can play music from my phone.

    Is it even possible with the model I have?
    It is a RNS-E Audi Navigation Plus - Part No: 8E0 035 192 C (I think)

    Any help would be GREEEEEAT.
     
  2. L7AUDI

    L7AUDI Member

    83
    2
    6
    I looked into this ages ago and was told by an Audi technician that it wasn't possible without actually removing the 6 disc changer in the glove box and then tapping into the wiring loom! well he didn't say it was totally impossible but probably cheaper the buy a new car with it fitted as standard lol
     
  3. kevin00

    kevin00 New Member

    19
    0
    1
    The things is I DON'T have the 6 Disc CD Changer so I was wondering if I could tap into it but through the back of the RNS-E unit...
     
  4. B5NUT

    B5NUT Well-Known Member VCDS Map User quattro Audi A6 Audi Avant Owner Group S-line owners group

    3,763
    660
    113
    Another Audi tech with an Ar$e from elbow problem!

    Below is a howto (It's a link I found not my write-up) It's an easy installation.

    rnseauxin - Audi Retrofit
     
  5. JasonS

    JasonS Member VCDS Map User

    124
    7
    18
    Or you can get one on eBay,
    Search for rns-e aux in.
     
  6. PetrolDave

    PetrolDave Well-Known Member

    1,559
    85
    48
    +1

    It never ceases to amaze me how much bullsh*t is spoken by some Audi technicians.

    EVERY EU model of RNS-E from the oldest to the newest can have an Aux IN AND a CD Changer - and the Aux In is no more than some wires...

    If it's a pre-2010 RNS-E then you just need to make sure you're running SW version 0650 and code it correctly to enable Aux In. If it's a 2010+ RNS-E then you just need to code it correctly.

    The only combination you can't have is a 2010+ RNS-E plus AMI plus Aux In - as the AMI uses the same audio in connections as Aux In does.
     

Share This Page