1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

RNS-E and Bluetooth Phone

Discussion in 'Retrofit' started by DragonDubz, Mar 16, 2014.

  1. DragonDubz
    Offline

    DragonDubz New Member

    Joined:
    Feb 4, 2014
    Messages:
    13
    Likes Received:
    2
    I am after some advice on this as i have no idea now what to do. I have retro fitted the bluetooth phone kit to my s4 and programmed it so that the phone comes up on the screen and can make calls etc. Now the problem is it will not let me add my phonebook or contacts and when i put the computer on and try and go into telephone it just say to many communication errors can not connect so i can not do anything to the bluetooth kit. Does anyone know what i am doing wrong or what i need to do to fix this as i am stuck now. Thanks for any advice on this.
    #1
  2. a6_chris
    Offline

    a6_chris Well-Known Member

    Joined:
    Jan 27, 2012
    Messages:
    1,884
    Likes Received:
    152
    Make sure you're using the latest revision of VCDS, post the fault codes.

    With your phone connected you should be able to press the MODE button on the steering wheel and your phone book will be scrollable through the DIS. Or press TEL then Memory (maybe) then phone book from the RNSE.
    #2
  3. DragonDubz
    Offline

    DragonDubz New Member

    Joined:
    Feb 4, 2014
    Messages:
    13
    Likes Received:
    2
    Thanks for the reply. Maybe i need to update VCDS then as i can not even get into the telephone to read and fault codes. If i press memory everything is grey so i can not do anything. When i pair the phone up it asks me to transfer phone book so i click ok but then nothing and asks me again until i click do not show this again.
    #3

Share This Page