1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

RNS-E and bluetooth coding help....................

S3 03 Sep 11, 2013

  1. S3 03

    S3 03 Member

    Im meeting a member off here tonight to buy an RNS-E MK2 and bluetooth.
    His going to bring his VCDS with him to code them, but we are not 100% sure what needs coding.
    is there any chance some could post up the coding settings

    my car had concert double din, and NO MFSW.
    its and 07 plate S3

    any help would be greatly appreciated
    Last edited: Sep 11, 2013
  2. jasonc

    jasonc Active Member Audi S3

    Your setup is a bit different to mine but I think your coding will need to be (I'm assuming you don't have BOSE):

    Go to CAN Gateway and tick the Telephone module
    Go to Radio/Navigation and set the coding to 0205751
    Go to Telephone and set the coding to 0010322

    All of the coding options are available here:
    Audi A3/S3 & A3 Cabriolet (8P) - Ross-Tech Wiki

    Make sure you do a test call and check the levels while you still have VCDS available - you may have to go into the Telephone module, Adaptation and set the Output Volume to -3dB if it sounds rubbish.
  3. S3 03

    S3 03 Member

    Yeah no Bose. Cheers mate.

Share This Page