Retrofitted lights

[MMC12]

Hi All,

First post, hopefully not the last.

I retrofitted some rear LED lights to my 2015 A3 8V. Everything seems to work as it should (on the outside) but on the inside when I indicate it seems to flash twice as fast as though a bulb is out?

Could this be due to the fact it's now LED and not halogen and there's some coding required somewhere?

Any help would be appreciated!

Thank you!

 

[ch1z64]

Hi All,

First post, hopefully not the last.

I retrofitted some rear LED lights to my 2015 A3 8V. Everything seems to work as it should (on the outside) but on the inside when I indicate it seems to flash twice as fast as though a bulb is out?

Could this be due to the fact it's now LED and not halogen and there's some coding required somewhere?

Any help would be appreciated!

Thank you!

Might be worth dropping @t8ups or @Ash187 a pm as first 1 is lights guy 2nd one is a retrofitter

 

[Ash187]

Yes this is down to coding.
Led tail lights are just wiring and coding without issues

 

[MMC12]

Thanks ch1z64.

And thanks Ash. Do you know what changes I need to make? I'm assuming it would be in Cent Elec?