1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Retrofit USB port?

Rabbit222 May 6, 2009

  1. JohnS3

    JohnS3 Active Member

    3,032
    5
    38
    Sorry, I meant the cubby hole/ glovebox liner.
     
  2. Staz

    Staz is a retronaut Staff Member Moderator VCDS Map User

    6,206
    64
    48
    That's the same pic I posted above mate. The easiest way to put a pic on here from another site is to right click, view image then copy the URL. In IE right click, properties, then copy the URL from there.

    It looks to me like if you have the iPod it's on the right and if you have the USB it's on the left. Both of which have the airbag switch in the middle.

    If like me you have neither you have two open pockets and the airbag switch is on the right (or the gap for it if you have bucket seats like I do):

    [​IMG]
     
  3. JohnS3

    JohnS3 Active Member

    3,032
    5
    38
    Mmmmmm. Looks like a complete new glovebox. Two parts shown to suit PR-UF2 in LHD.

    [​IMG]
     
  4. Rabbit222

    Rabbit222 Active Member

    708
    124
    43
    Cheers John! My glove compartment looks exactly like Staz's.

    At the risk of sounding totally stupid, would you mind pointing out what part numbers will be required from the ETKA pic you have posted? From what I can see I will require Item 13 and 14 and possibly the entire glove compartment as you have pointed out already. **** this seems like a very costly exercise :unsure:
     
  5. Rabbit222

    Rabbit222 Active Member

    708
    124
    43
    Agh feck it! Got the quote for all the goodies required and it works out to just over R7000 which equates to roughly 500 pounds! Insane! NHN, PM on its way mate!
     
  6. JohnS3

    JohnS3 Active Member

    3,032
    5
    38
    I'd be tempted to cut the back out of my globebox liner. £500 for a glovebox!
     
  7. Staz

    Staz is a retronaut Staff Member Moderator VCDS Map User

    6,206
    64
    48
    Yep, ditto.
     
  8. Rabbit222

    Rabbit222 Active Member

    708
    124
    43
    Grrrrrrrrr! Scared to butcher it, unless I look at getting item 13 and then doing some mods to make it fit?
     
  9. Staz

    Staz is a retronaut Staff Member Moderator VCDS Map User

    6,206
    64
    48
    We're going around in circles! lol

     
  10. Staz

    Staz is a retronaut Staff Member Moderator VCDS Map User

    6,206
    64
    48
    Did you not notice the lol? Why are you getting your knickers in a twist?
     
  11. JohnS3

    JohnS3 Active Member

    3,032
    5
    38
    Will check for you next time the laptops on
     
  12. JohnS3

    JohnS3 Active Member

    3,032
    5
    38
    Item 12 is a stowage compartment for CDs and item 13 & 14 have no part number shown.
     
  13. Rabbit222

    Rabbit222 Active Member

    708
    124
    43
    Excuse my ignorance John, but the part number for the glove compartment that you posted...is that inclusive of all the bits posted in that ETKA pic??
     
  14. JohnS3

    JohnS3 Active Member

    3,032
    5
    38
    It a complete new glovebox including parts 2, 3, 8, 9 & 10.
    Part numbers 8P1 857 035 H & M are specifically for options UF-1 (ipod) and UF-2 (usb)

    I'll take a closer look at mine to see if item 13, the frame thing, is used on mine. I'll also check the A4 pages to see if the part number is listed. You might want to PM a chap called Frenchy2475 who is an audi parts guy just to get the full low down on these parts, just in case!
     
  15. Rabbit222

    Rabbit222 Active Member

    708
    124
    43
    Cheers for the time and effort you have taken in assisting me, it is sincerely appreciated.
     

Share This Page