1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Replacement DV

czm Sep 27, 2013

  1. czm

    czm Member

    265
    19
    18
    I recently had my 1.8t BEX A4 remapped at Rtech.
    Been a transformation on how it pulls and the guys there managed some good results.

    While I was there Nick mentioned that my stock DV was ‘fluttering’ a bit and I should look at replacing it when possible.
    Has anybody got the part number for the stock one I need?

    Thanks
     
  2. glenandem

    glenandem Active Member

    669
    30
    28
    hi mate,why dont you upgrade it?
    i had a mk4 golf a few yrs ago with the 1.8t engine and had that remapped and i believe the standard dv where prone to leaking due to being plastic or they wouldnt hold pressure,something like that anyway i replaced mine with a forge dv, i think if i remember rightly it was a 007p or along those lines and it was a quiet one too untill i fitted an induction kit where you could hear it through that slightly!
     
  3. czm

    czm Member

    265
    19
    18
    Thanks m8, I was going to upgrade but Nick at Rtech said dont bother and the stock one is more than adequate.
     
  4. SmoothAssault

    SmoothAssault Will design for mods

    822
    53
    28
    The Forge DV 008 was the revised design, which TTS Roadsport fitted for me. They snapped the OEM one when they removed it but I think I still have it in the Forge box so I could check the part no. for you when I get home, provided it's printed on the part?
     
  5. glenandem

    glenandem Active Member

    669
    30
    28
    Fair enough he probably knows more than me obviously!!
    I just remember it was a part people recommended on the ukmkiv forum when I had my golf, if I remember rightly one of the reasons where that the standard one didn't hold boost as well as a upgraded one?
    maybe the audi ones are slightly stronger than in the mk4 golfs?
     
  6. Ian2012

    Ian2012 Active Member

    473
    29
    28
    i went for a stock one to replace the broken forge one that was on the car when we got it, the car couldn't pull the skin off a rice pudding
     
  7. pauldazzle

    pauldazzle Well-Known Member

    1,089
    75
    48
    Nothing wrong with the OEM 710N DV.
     
  8. HEKTOR

    HEKTOR Member

    401
    11
    18
    +1

    I run these on my 650bhp B5 RS4 without issue.
     
  9. pauldazzle

    pauldazzle Well-Known Member

    1,089
    75
    48
    Here you go. 06A145710N
     
    czm likes this.
  10. czm

    czm Member

    265
    19
    18
    awesome thanks m8

    i am sure the PN I had from Audi had a P in it???? I will check.
     
  11. pauldazzle

    pauldazzle Well-Known Member

    1,089
    75
    48
    All the VAG 1.8ts share the same DV.
     
  12. SmoothAssault

    SmoothAssault Will design for mods

    822
    53
    28
    Yep, here's mine from my 190 1.8T, ends in P:

    2013-09-27 17.51.44.jpg
     
  13. czm

    czm Member

    265
    19
    18
    yep that's the one, cheers bud.
     

Share This Page