1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Removal of rear seat base and load cover in an avant

Discussion in 'A4/A4 cabriolet/S4 forum(B6 chassis)' started by 46TheDoctor, Jan 5, 2008.

  1. 46TheDoctor

    46TheDoctor Valentino Rossi A.K.A The Doctor

    Joined:
    Feb 15, 2007
    Messages:
    312
    Likes Received:
    1
    Any of u guys know how to get the rear seat base and load cover/dog guard out of an 04 Avant, im gonna bust it to bits if it keeps on rattling and squeeking.:icon_thumright:
     
  2. MattS3

    MattS3 Active Member

    Joined:
    Jul 27, 2005
    Messages:
    571
    Likes Received:
    25
    I know how it comes out on the saloon.

    You need to stand in the back footwell of each side of the car, one at a time (ok bent over, but you know what I mean). Then grab the seat in the middle at the front and pull upwards, quickly.

    The seats in the saloon do not fold upwards, if they do in the avant, then that must be a differnent operation I guess.
     
  3. AndyMac

    AndyMac Moderator
    Staff Member Moderator

    Joined:
    Jun 10, 2003
    Messages:
    9,833
    Likes Received:
    37
    For the seat base you just push it towards the back of the car then up, first behind the drivers seat then behind the passenger seat.
    The load cover just slides out (drivers side) when you fold the seat backs down, and it's bloody heavy and a total waste of time IMO.
     
  4. 46TheDoctor

    46TheDoctor Valentino Rossi A.K.A The Doctor

    Joined:
    Feb 15, 2007
    Messages:
    312
    Likes Received:
    1
    Cheers for the guidance chaps.:icon_thumright:
     
  5. pablo

    pablo Member

    Joined:
    Aug 7, 2006
    Messages:
    801
    Likes Received:
    33
    mine required a kick to get it free (the boot cover). weighs a TON
     

Share This Page