1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Remote keys wont erase!

Discussion in 'A3/S3 Forum (8L Chassis)' started by @udi A3, Aug 31, 2013.

  1. @udi A3
    Offline

    @udi A3 Site Sponsor Site Sponsor VCDS Map User

    Joined:
    May 25, 2012
    Messages:
    1,766
    Likes Received:
    175
    [Aug 31, 2013]
    So last week I popped round G60Lieghs and cooked my head trying to sync a new remote to his s3.

    He currently has 2 working fobs, but wanted a third as the ones I am stocking look tidy.

    Ive been through the manual and VCDS process of programming remotes, (no issue with transponders and immo), but for some reason they wont erase. The new remote wont sync, but is recognized in measuring blocks. New remote also immediately synced to my own car so not faulty.

    There was a couple of databus errors, and I suspect those to be causing problems, or the CL unit itself, but for now we are head scratching. Im sure liegh will post the scan from vcds shortly.

    Any thoughts?
    #1
  2. Ads

    Ads

    [Sep 16, 2014]

  3. g60leigh
    Offline

    g60leigh Well-Known Member

    Joined:
    Jun 16, 2007
    Messages:
    1,414
    Likes Received:
    127
    [Sep 1, 2013]
    Can bus errors can be ruled out as it was single wire operation between the TMC and instruments cluster for the RNS sat nav link. This has all been disconnected before trying sync again.
    Central locking module isn't showing any fault codes

    The only thing that I can think of is there a different procedure to do this between Tom's pre facelift 2wd and my facelift 4wd. Does the central locking alter?

    Only fault code I have is on xenon level sensor:

    Saturday,31,August,2013,19:51:14:34172
    VCDS Version: Release 11.11.6
    Data version: 20121223


    Chassis Type: 8L - Audi A3/S3
    Scan: 01 02 03 08 15 16 17 22 35 37 45 55 56 57 75 76

    VIN: WAUZZZ8LZ1A069663
    -------------------------------------------------------------------------------
    Address 01: Engine Labels: None
    Part No: 8N0 906 018 J
    Component: 1.8L R4/5VT G 0004
    Coding: 10710
    Shop #: WSC 02629
    VCID: 38751DA418D6F7D8D8B
    WAUZZZ8LZ1A069663 AUZ7Z0Y1752057

    No fault code found.
    Readiness: 0100 0100

    -------------------------------------------------------------------------------
    Address 03: ABS Brakes Labels: 8N0-907-379-MK20-E.lbl
    Part No: 8N0 907 379 E
    Component: ESP 20 CAN V005
    Coding: 18448
    Shop #: WSC 06435
    VCID: 3E790BBC3AF2C9E8127

    No fault code found.

    -------------------------------------------------------------------------------
    Address 08: Auto HVAC Labels: Redir Fail!
    Part No: 8L0 820 043 K
    Component: A3 KLIMAAUTOMAT 0101
    Coding: 00041
    Shop #: WSC 01236
    VCID: 30652584F0A62F9890B

    No fault code found.

    -------------------------------------------------------------------------------
    Address 15: Airbags Labels: 8L0-959-655-AI8.lbl
    Part No: 8L0 959 655 J
    Component: Airbag Front+Seite 4008
    Coding: 01104
    Shop #: WSC 06435
    VCID: 458B64505F249A3053D

    No fault code found.

    -------------------------------------------------------------------------------
    Address 17: Instruments Labels: 8L0-920-xxx-17.lbl
    Part No: 8L0 920 980 L
    Component: AB-KOMBIINSTR. VDO D12
    Coding: 01444
    Shop #: WSC 01044
    VCID: 3C7D01B42CEEDBF83C3
    WAUZZZ8LZ1A069663 AUZ7Z0Y1752057

    No fault code found.

    -------------------------------------------------------------------------------
    Address 22: AWD Labels: 02D-900-554.lbl
    Part No: 02D 900 554 B
    Component: HALDEX LSC ECC 0006
    VCID: 1F47D6389D38A0E0391

    No Faults Found
    or DTCs not supported by controller
    or a communication error occurred

    -------------------------------------------------------------------------------
    Address 35: Centr. Locks Labels: 8D0-862-257.lbl
    Part No: 8D0 862 257 E
    Component: CV-Pump, Alarm, RC D17
    Coding: 15178
    Shop #: WSC 06435
    VCID: 2F6726F8ED983060891

    No fault code found.

    -------------------------------------------------------------------------------
    Address 37: Navigation Labels: 4B0-035-192-RNSD-37.lbl
    Part No: 4D0 035 192 H
    Component: Navigation BNO 0140
    VCID: 244DD9D4B45E8338643

    No fault code found.

    -------------------------------------------------------------------------------
    Address 45: Inter. Monitor Labels: 4B0-951-173.lbl
    Part No: 4B0 951 173
    Component: Innenraumueberw. D03
    Coding: 00001
    Shop #: WSC 00000
    VCID: E0C515C460C65F18C0B

    No fault code found.

    -------------------------------------------------------------------------------
    Address 55: Xenon Range Labels: 4B0-907-357-AUT.lbl
    Part No: 4B0 907 357
    Component: LEUCHTWEITEREGLER D004
    Coding: 00014
    Shop #: WSC 06435
    VCID: E5CB04D07FE43A3033D

    1 Fault Found:
    00774 - Level Control System Sensor; Left Rear (G76)
    31-00 - Open or Short to Ground

    -------------------------------------------------------------------------------
    Address 56: Radio Labels: 4B0-035-192-RNSD-56.lbl
    Part No: 4D0 035 192 H
    Component: Radio BNO 0001
    Coding: 00117
    Shop #: WSC 02314
    VCID: 244DD9D4B45E8338643

    No fault code found.

    End ---------------------------------------------------------------------
    #2
  4. @udi A3
    Offline

    @udi A3 Site Sponsor Site Sponsor VCDS Map User

    Joined:
    May 25, 2012
    Messages:
    1,766
    Likes Received:
    175
    [Sep 1, 2013]
    My cars facelift too! To erase fobs go into the cl module, adaption group 00, and read and save. That should clear all remotes.
    #3

Share This Page