1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Rear speaker wiring

vwgtiking Sep 2, 2013

  1. vwgtiking

    vwgtiking Active Member

    I have installed an aftermarket headunit and I have the RCA lead method which connects to the corresponding oem connector block and wired the remote amp "on" wire. Then i adjusted the rear to balance with the front but volume is still low At high volumes.

    My question is still leaving the amp remote connected can I wire the Rear R +/- And L +/- to oem ISO connecting block and use the headunits built in amp so all speakers are at same volume?
    Last edited: Sep 2, 2013

Share This Page