1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Rear coilovers adjusters H and r

Discussion in 'A4/A4 cabriolet/S4 forum(B6 chassis)' started by rob irl tdi, Oct 20, 2011.

  1. rob irl tdi
    Offline

    rob irl tdi Member

    Joined:
    Jul 14, 2010
    Messages:
    240
    Likes Received:
    1
    Are the rear coilover adjusters suppose to be fitted on the top of the spring? I thought the car would have been low at the rear to match the front like an even drop. I was told they were wound down the whole way at rear


    [​IMG]

    [​IMG]
    #1
  2. Paul @ Unit
    Offline

    Paul @ Unit Active Member

    Joined:
    Aug 10, 2009
    Messages:
    1,332
    Likes Received:
    17
    bottom of the spring, every car i have had has anyway
    #2
  3. bubstar
    Offline

    bubstar Member

    Joined:
    Jul 8, 2004
    Messages:
    550
    Likes Received:
    0
    They fit on the top on my KW's and I can't see H&R being any different. The spring sits on the standard rubber mount on the lower arm.

    [​IMG]

    [​IMG]

    It looks like you still have the standard rubber top bush fitted. My KW's don't use this and just have a large nylon washer under the adjuster platform.

    Might be best to contact H&R.

    KW were very helpful when I needed some advice.

    BUB
    #3
  4. CMD
    Offline

    CMD Pointing Forward's!!!!!!!!!

    Joined:
    Nov 22, 2008
    Messages:
    3,016
    Likes Received:
    17
    Correct the Rubber bush at the top need's to be binned..
    #4

Share This Page