1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Rear camber

Discussion in 'A3/S3/Sportback (8P Chassis)' started by Ryan94, Aug 19, 2013.

  1. Ryan94
    Offline

    Ryan94 New Member

    Joined:
    May 30, 2013
    Messages:
    7
    Likes Received:
    0
    Hi,

    What's the best way of adding rear camber, already at 3 degree on the rear camber arm but need to add some more. Can't find any camber shims for the 8p.

    any ideas?

    cheers
    #1
  2. S3Alex
    Offline

    S3Alex Rarely neutral

    Joined:
    Dec 3, 2008
    Messages:
    5,632
    Likes Received:
    1,216
    Why add more camber?

    You really shouldn't need more than that,and even mine doesn't need more.
    #2
  3. Ryan94
    Offline

    Ryan94 New Member

    Joined:
    May 30, 2013
    Messages:
    7
    Likes Received:
    0
    Will be running 9.5j et18 so I reckon I'll need to be running about 5 degree to be safe
    #3
  4. TDI140
    Offline

    TDI140 Well-Known Member

    Joined:
    May 19, 2011
    Messages:
    1,378
    Likes Received:
    140
    Holyyyy s*** ET18 with 9.5J thats crazy please post pics also 19" ? Or 18" ?
    #4
  5. Ryan94
    Offline

    Ryan94 New Member

    Joined:
    May 30, 2013
    Messages:
    7
    Likes Received:
    0
    18in, there porsche eta beta krone splits with 30mm spacers. Should look decent when set up right, I know it'll be terrible to drive before anyone says
    #5
  6. S3Alex
    Offline

    S3Alex Rarely neutral

    Joined:
    Dec 3, 2008
    Messages:
    5,632
    Likes Received:
    1,216
    Well....that's what I was about to say but if you're doing this for looks,then you know what you'll get.

    5degrees is way beyond what's good and the tyre wear will be interesting.
    #6
  7. TDI140
    Offline

    TDI140 Well-Known Member

    Joined:
    May 19, 2011
    Messages:
    1,378
    Likes Received:
    140
    Im scared to run ET35 lol dropping down to ET45 with smaller adaptors lol but would love to see pics mate
    #7
  8. Ryan94
    Offline

    Ryan94 New Member

    Joined:
    May 30, 2013
    Messages:
    7
    Likes Received:
    0
    I'll get some photos up when it's done, currently running 19in 8.5j et35 so it'll be interesting for sure
    #8
  9. Ryan94
    Offline

    Ryan94 New Member

    Joined:
    May 30, 2013
    Messages:
    7
    Likes Received:
    0
    Anyone got any ideas on the camber?
    #9
  10. Ryan94
    Offline

    Ryan94 New Member

    Joined:
    May 30, 2013
    Messages:
    7
    Likes Received:
    0
    Bump
    #10

Share This Page