Quattro Rear Suspension Overhaul

[AudiLeon]

Decided I'm going to overhaul the rear suspension.
Trying to work out what I'm going to need.

Anyone done it before?

 

[Spacemonkey]

Well I'm about to dive in and do my front and rear springs/shocks/mounts etc. Can't be that hard..

Sport spec Bilstein B4 shocks, Sport spec springs, bump stops, rear top mount, front top mount and plastic crapshields. Couldn't work out which style of top mount I need as there appears to be two types, so I ordered both.

 

[mattyb6]

Anti roll bar bushes too

 

[mattyb6]

Anti roll bar bushes too

 

[Spacemonkey]

Good point! I'm not getting any noises from my suspension at all and it's hard to jack it up to get underneath where I live at the mo' so only plan on getting in there once.

 

[mattyb6]

It's all pretty easy, even the pinch bolt on the front is easy, IF you do it right with prompt tools

 

[AudiLeon]

I was thinking along the lines of all the arm bushes, tie rods and what not.

It's all pretty easy, even the pinch bolt on the front is easy, IF you do it right with prompt tools

True. I used a heat gun, wd40, angle grinder, mallet and punch. Took 20 mins.