1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Porsche Alloys

Discussion in 'A3/S3/Sportback (8P Chassis)' started by TurboRoss, Jun 30, 2011.

  1. TurboRoss

    TurboRoss New Member

    Joined:
    Apr 18, 2010
    Messages:
    24
    Likes Received:
    0
    Evening Ladies/Gents

    Quick question will Porsche turbo 2 alloys (pictured below) fit my 2006 A3? I've listed the sizes and offsets below.

    Fronts: size 8.5 x 18 et 50
    Rears: size*10 x 18 et 65

    Fronts 225 x 40 x ZR18 load index 87Y.
    Rears 265 x 35 x ZR18*

    http://http://www.google.co.uk/m/search?
    site=images&source=mog&hl=en&gl=uk&client=safari&q=Porsche%20turbo%202%20alloys&sa=N#i=9

    Any help would be Appreciated

    Thanks
     
  2. N8

    N8 Kowalski Details
    VCDS Map User

    Joined:
    Jul 4, 2007
    Messages:
    17,166
    Likes Received:
    696
    The minimum PCD adapter you can get is 15mm. So that will make the fronts

    18 x 8.5 ET 35, Rears then being
    18 x 10 ET40

    I'd say wear a 215/35/18 up front and try a 225/40/18 on the rear
     
  3. Blueie

    Blueie He who dears' wins!!

    Joined:
    Aug 26, 2009
    Messages:
    347
    Likes Received:
    2
    :applaus::applaus:The wheel Guru speaks
     
  4. N8

    N8 Kowalski Details
    VCDS Map User

    Joined:
    Jul 4, 2007
    Messages:
    17,166
    Likes Received:
    696
    :laugh:
     
  5. matt_hilluk

    matt_hilluk facebook.com/m9tbh

    Joined:
    May 19, 2011
    Messages:
    250
    Likes Received:
    16
    riggaz_a3 has porsche alloys on his if that helps :)
     
  6. basssound

    basssound Member

    Joined:
    Dec 1, 2010
    Messages:
    203
    Likes Received:
    10
    Surely you'll not get 10's in the rears?!?!
     
  7. TurboRoss

    TurboRoss New Member

    Joined:
    Apr 18, 2010
    Messages:
    24
    Likes Received:
    0
    I was thinking that bud, even still might be worth a go - worst that can happen is I have to sell them on...
     
  8. N8

    N8 Kowalski Details
    VCDS Map User

    Joined:
    Jul 4, 2007
    Messages:
    17,166
    Likes Received:
    696
    Lukes running 9.5s on 215/40/18s and 10s will fit but will be pokey island :wub:
     
  9. Kash3838

    Kash3838 Member

    Joined:
    May 2, 2011
    Messages:
    177
    Likes Received:
    11
    h&R hubcentric wheel adapters, done them on a beetle 20mm thick. dont go staggered keep the same width all way around.
     
  10. N8

    N8 Kowalski Details
    VCDS Map User

    Joined:
    Jul 4, 2007
    Messages:
    17,166
    Likes Received:
    696
    Which will be 15mm Kash
     
  11. Kash3838

    Kash3838 Member

    Joined:
    May 2, 2011
    Messages:
    177
    Likes Received:
    11
  12. N8

    N8 Kowalski Details
    VCDS Map User

    Joined:
    Jul 4, 2007
    Messages:
    17,166
    Likes Received:
    696
    I don't understand your point?
     
  13. Kash3838

    Kash3838 Member

    Joined:
    May 2, 2011
    Messages:
    177
    Likes Received:
    11
    Sorry was the question which spacers are 15mm??
     
  14. N8

    N8 Kowalski Details
    VCDS Map User

    Joined:
    Jul 4, 2007
    Messages:
    17,166
    Likes Received:
    696
    No, my original post states he would need 15mm adapters, really doesn't matter :laugh:
     
  15. Kash3838

    Kash3838 Member

    Joined:
    May 2, 2011
    Messages:
    177
    Likes Received:
    11
    Ok my bad!! Lol
     
  16. N8

    N8 Kowalski Details
    VCDS Map User

    Joined:
    Jul 4, 2007
    Messages:
    17,166
    Likes Received:
    696
    No worries lad, communication often gets lost via the internet :Flush:
     

Share This Page