1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Polo 6n2 cutting out with error codes

Discussion in 'VCDS (formerly VAG-COM) forum' started by Nilz, Feb 17, 2012.

  1. Nilz
    Offline

    Nilz Defo worth the wait :)

    Joined:
    Apr 9, 2006
    Messages:
    10,220
    Likes Received:
    390
    Did a scan on the wifes polo earlier as she said that it keeps cutting out intermittently, the below faults came up on it. This has been going on for a while now and I have already replaced the camshaft sensor and its still the same, someone else mentioned it could be the crank sensor (?)

    Can anyone advise at all on the below please?

    3 Faults Found:

    00519 - Intake Manifold Pressure Sensor (G71)

    31-10 - Open or Short to Ground - Intermittent

    00513 - Shareware Version. To Decode all DTCs

    03-10 - Please Register/Activate - Intermittent

    00282 - Shareware Version. To Decode all DTCs

    26-10 - Please Register/Activate - Intermittent

    Thanks in advance
    Nilz
    #1
  2. towcestervag
    Offline

    towcestervag Member

    Joined:
    Jan 14, 2011
    Messages:
    165
    Likes Received:
    5
    first clean out throttle body and reset
    remove map sensor and clean first but you may need to replace
    also check cam timing if 16v engine as this fault can come up if timing slipped
    #2

Share This Page