1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

polishing machine

Discussion in 'Detailing' started by 1animal1, Mar 21, 2008.

  1. 1animal1
    Offline

    1animal1 The Clar!! it mouves!!! VCDS Map User

    Joined:
    Dec 27, 2007
    Messages:
    9,978
    Likes Received:
    31
    [Mar 21, 2008]
    Ideally i am looking at buying one of these polishing machines to get rid of my swirls etc.... although cant really warrant shelling out for the Meguiars tool as i will probably use it once/twice...... I have seen a few on ebay going at between £30-£40..... what is going to be the difference between one of these and the much more expensive Meguiars model. Obviously id be looking to buy the decent attachments that affix... I know theres a difference in how they rotate, the ebays probably do full 360's where as the Meguiars is more of an aggitator (confirmation plz:eek:)
    #1
  2. Ads

    Ads

    [Nov 27, 2014]

  3. chris_20
    Offline

    chris_20 Member

    Joined:
    Nov 11, 2006
    Messages:
    707
    Likes Received:
    2
    [Mar 21, 2008]
    can u post a link to the machines that your looking at on ebay? we'll be able to tell u a bit more then but to be honest without even seeing them there prob not gonna be up2 the task in hand. this is probs gonna be the cheapest polisher you can get which will get the job done. heard lots of good things bout this polisher aswell. o and i think some1 has caught the detailing bug with all these questions lol
    http://www.polishedbliss.co.uk/acatalog/meguiars-g220-dual-action-polishing-machine-polish.html
    #2
  4. 1animal1
    Offline

    1animal1 The Clar!! it mouves!!! VCDS Map User

    Joined:
    Dec 27, 2007
    Messages:
    9,978
    Likes Received:
    31
    [Mar 21, 2008]
    erm...just a tad Chris:jump:..... ive always been interested in this sort of stuff but didnt realise it was so 'do-able', a few posts on here have got me hooked aswell as the Polished Bliss posts..... its addictive!!! now just need to get some work done;o)
    http://cgi.ebay.co.uk/KRAUSS-SZ-818...ryZ72201QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

    this is just one of the polishers ive spotted on ebay..... again.... apart from the 360 disc... cant see that theres much difference.... open to bein proved wrong though
    #3
  5. chris_20
    Offline

    chris_20 Member

    Joined:
    Nov 11, 2006
    Messages:
    707
    Likes Received:
    2
    [Mar 21, 2008]
    gotta be honest im not the best with machine polishers. one of the more established members will be able to help out a bit more with this one but im sure there will be a big difference!
    by the way check out detailingworld.co.uk the ideal website for us enthusiasts
    #4
  6. 1animal1
    Offline

    1animal1 The Clar!! it mouves!!! VCDS Map User

    Joined:
    Dec 27, 2007
    Messages:
    9,978
    Likes Received:
    31
    [Mar 21, 2008]
    will do..... actually i have just had a read through the link you placed on the Meguiar model and it states that the 360 machines are harder to operate, making it far easier to ruin the paintwork by cutting too much into it.....
    #5
  7. rickparmar
    Offline

    rickparmar va va voom

    Joined:
    May 18, 2004
    Messages:
    2,268
    Likes Received:
    0
    [Mar 21, 2008]
    animal, that one on ebay looks quite good, id be tempted to buy that
    #6
  8. rickparmar
    Offline

    rickparmar va va voom

    Joined:
    May 18, 2004
    Messages:
    2,268
    Likes Received:
    0
    [Mar 21, 2008]
    #7
  9. teknobod
    Offline

    teknobod Member

    Joined:
    May 18, 2003
    Messages:
    46
    Likes Received:
    1
    [Mar 21, 2008]
    The cheaper machines are rotary polishers, whereas the Megs 220, PC 7424 and UDM's are all random orbital polishers (Dual action).

    Both are as effective when used correctly, but I believe the Random Orbitals are easier for novices (such as myself)

    Andy
    #8
  10. cheekeemonkey
    Offline

    cheekeemonkey Member

    Joined:
    Dec 30, 2007
    Messages:
    128
    Likes Received:
    0
    [Mar 21, 2008]
    animal

    The ones on eBay are rotary as teknobod states.

    Essentially these are harder to use and therefore, to the inexperienced individual carry more risk of damage and burns to the paint.

    A Dual Action (DA) polisher such as the Megs (the best option as it is 230V and is the best to operate compared to the PC or UDM) is a lot easier to use for the novice and whilstit isn't foolproof it is a lot harder to damage your paint with one of these.

    It is such a wide subject that I'd highly recommend a visit to the forum on www.detailingworld.co.uk

    In particular look at this guide: -

    http://www.detailingworld.co.uk/forum/showthread.php?t=13655


    Be prepared to lose lots of time as you sit at your computer absorbed!


    Hope this helps

    CM
    #9
  11. 1animal1
    Offline

    1animal1 The Clar!! it mouves!!! VCDS Map User

    Joined:
    Dec 27, 2007
    Messages:
    9,978
    Likes Received:
    31
    [Mar 22, 2008]
    thanks for the posts fellas.....

    Monkey.... you've probably guessed that i haven't spent as much time as i should at the PC researching, looking at my threads:eek:)

    I think im going to go down the route of having it done rather than doing it myself.... although i love doing the work cos it gives you more pride and more reason to maintain it.... think ill end up messing it up, plus once all the compounds have been bought, i might aswell have shelled out for a proper job..... then theres the argument of having the stuff for the future..... grrrr..... i'd love to learn to use the rotary machines because (as dangerous as they are) they seem to provide the most benefit when used correctly.....
    #10
  12. chris_20
    Offline

    chris_20 Member

    Joined:
    Nov 11, 2006
    Messages:
    707
    Likes Received:
    2
    [Mar 22, 2008]
    ive had this argument with meself plenty off times and came to the conclusion.....let my mate do it for nothing :)
    #11
  13. 1animal1
    Offline

    1animal1 The Clar!! it mouves!!! VCDS Map User

    Joined:
    Dec 27, 2007
    Messages:
    9,978
    Likes Received:
    31
    [Mar 22, 2008]
    that doesn't help Chris:jump:

    im gonna post some pics when i get a chance so you guys can comment..... just washed the damn thing, removed tar and clayed/waxed my rear bumper then the snow started again grrr
    #12
  14. chris_20
    Offline

    chris_20 Member

    Joined:
    Nov 11, 2006
    Messages:
    707
    Likes Received:
    2
    [Mar 22, 2008]
    lol blastered weather! so what did u make of the clay- did it pull off alot of dirt?
    #13
  15. cheekeemonkey
    Offline

    cheekeemonkey Member

    Joined:
    Dec 30, 2007
    Messages:
    128
    Likes Received:
    0
    [Mar 22, 2008]
    I agree you can spend as much on getting the gear and having no idea !!

    For me I guess its a thing of paying someone to do something I'd love to be able to do for myself and get that personal satisfaction of looking at it and saying "I did that"

    From a practice point of view you could always buy a rotary and get a couple of audi panels from the scrappers

    I've seen it where someone has inflicted scratches themselves then corrected very well before they let themselves loose on their own motor

    If you want someone local to you then Craig Mudd (www.muddydetail.co.uk) comes highly recommended over on Detailing World and is based Sheffield way.
    #14
  16. 1animal1
    Offline

    1animal1 The Clar!! it mouves!!! VCDS Map User

    Joined:
    Dec 27, 2007
    Messages:
    9,978
    Likes Received:
    31
    [Mar 22, 2008]
    erm..... not much of the small part of mine i tried, however, decided to have a go at the misus yellow mini. OMG!! did half the boot to see the difference between non clayed and clayed, although not the most noticable when finished and waxed(prob down to the colour and the fact that it was waxed by the dealer fortnight ago).......apart from the ultra smooth surface.... the amount of **** that the clay picked off was unbelievable!!! lad next door is sold on the stuff after seeing what i removed........ bloody good show!!!:w00t:
    #15
  17. WX51TXR
    Offline

    WX51TXR Polished Bliss

    Joined:
    Mar 6, 2005
    Messages:
    1,452
    Likes Received:
    13
    [Mar 24, 2008]
    More discussion on the difference between rotary and dual action polishers in the guide to polishing on our site...

    http://www.polishedbliss.co.uk/acatalog/guides_polish.html

    Best to stick to dual action machines like the G220 if you do decide to do it yourself; rotary tools need a lot more practice to master. :yes:
    #16

Share This Page