1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Pls help - cleaning issue! Is it possible?

Discussion in 'A3/S3/Sportback (8P Chassis)' started by Tara Jasmin Sura, Apr 21, 2011.

  1. Tara Jasmin Sura
    Offline

    Tara Jasmin Sura New Member

    Joined:
    Apr 21, 2011
    Messages:
    10
    Likes Received:
    0
  2. Ads

    Ads

    [Sep 21, 2014]

  3. Dan.
    Offline

    Dan. Member

    Joined:
    Apr 7, 2011
    Messages:
    59
    Likes Received:
    0
    [Apr 21, 2011]
    could be done pretty easily, just unbolt the seats... and unplug airbag sensors etc. you could even remove the runners if you wanted, just make sure you bolt them down tight again,

    not sure if unplugging the airbag plug would throw any fault codes up so you would have to get them cleared once back together,



    as for somewhere to do it in Essex... wouldnt have a clue, im guessing it would be a do it at home on your drive kinda job or ask a professional detailer, who didnt mind taking the seats out, (or someone on here might be able to help if your not too handy with the tools...)
    #2
  4. N8
    Offline

    N8 Kowalski Details VCDS Map User

    Joined:
    Jul 4, 2007
    Messages:
    17,161
    Likes Received:
    688
    [Apr 22, 2011]
    Yeh Rob is your man as recommended.
    #3
  5. NHN
    Offline

    NHN Retrofitter - Audi - VW - Skoda - Seat Site Sponsor VCDS Map User

    Joined:
    Jan 14, 2008
    Messages:
    27,320
    Likes Received:
    1,229
    [Apr 23, 2011]
    There are no runners on the floor, its all built into the seat, just 4 bolts onto the car, airbag light will show & I expect he will have a system to extinguish the light when finished, so wouldnt worry there.
    #4
  6. Tara Jasmin Sura
    Offline

    Tara Jasmin Sura New Member

    Joined:
    Apr 21, 2011
    Messages:
    10
    Likes Received:
    0
    [Apr 26, 2011]
    Thanks all, I will get in touch with Rob!
    #5
  7. basssound
    Offline

    basssound Member

    Joined:
    Dec 1, 2010
    Messages:
    203
    Likes Received:
    10
    [Apr 26, 2011]
    Just disconnect the neg terminal on your batt before disconnecting the air bag connectors under the seat.
    This will stop the SRS from storing a fault codes so you can just reinstall, connect the battery and no stored fault codes to clear ;)
    #6
  8. Tara Jasmin Sura
    Offline

    Tara Jasmin Sura New Member

    Joined:
    Apr 21, 2011
    Messages:
    10
    Likes Received:
    0
    [Apr 26, 2011]
    I'm a lady owner with a passion for OCD cleaning (especially keeping my baby clean) but also great manicures so I won't be getting my hands dirty I'm afraid! lol just wanted to see if anyone could do it.
    #7

Share This Page