1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Part or Part code needed for Reverse switch connector?

Discussion in 'A3/S3 Forum (8L Chassis)' started by reptor245, Oct 25, 2011.

  1. reptor245
    Offline

    reptor245 Active Member

    Joined:
    Jan 7, 2009
    Messages:
    1,157
    Likes Received:
    6
    [Oct 25, 2011]
    Hey guys. My Reverse lights stopped working and after spending a few days checking the wiring, i have nailed it down to a broken wire at the connector that goes on the reverse switch. The red wire has snapped right as it goes into the black connector on the switch.
    Mine is the D shaped switch and not the big black square switch type.

    Anyways after taking out the battery and air box to get to the connector, i tried to solder it back on but there is no wire showing at the connector end.

    Anyone know if i can buy the connector (has to have wires showing so i can solder the loom to it) or know were i can source a second hand one from? Ive mailed a few people breaking A3`s on ebay but as yet no-one has one.

    Thanks in advance

    This is the type im after.
    [​IMG]
    Last edited: Oct 25, 2011
    #1
  2. Ads

    Ads

    [Dec 19, 2014]

Share This Page