1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

part number

Discussion in 'A4/A4 cabriolet/S4 forum(B6 chassis)' started by toaophil, Jul 1, 2013.

  1. toaophil

    toaophil Audi!

    Joined:
    Apr 5, 2013
    Messages:
    69
    Likes Received:
    1
    Need a new centre cap for my alloys - worried that some of the ebay stuff can turn out not to fit, even if measurements match.

    How could I find out the part number for my current centre caps?

    Cheers
     
  2. Google AdSense Guest Advertisement



    to hide this advert.
  3. quattrojames

    quattrojames Moderator
    Staff Member Moderator Audi Avant Owner Group Audi A6

    Joined:
    Mar 28, 2008
    Messages:
    14,005
    Likes Received:
    528
    Is it not printed on the back of them?
     
  4. toaophil

    toaophil Audi!

    Joined:
    Apr 5, 2013
    Messages:
    69
    Likes Received:
    1
    Na can't see anything on any of them
     
  5. swarcup

    swarcup Well-Known Member

    Joined:
    Sep 9, 2009
    Messages:
    1,323
    Likes Received:
    39
    post a picture of them as there are a few different ones. Are your alloys genuine?
     
  6. dsmclark40v

    dsmclark40v Member

    Joined:
    Sep 24, 2006
    Messages:
    744
    Likes Received:
    11
    I have some audi centre caps somewhere. If I find them and they match yours you can have them for postage if you want.

    Sam
     
  7. toaophil

    toaophil Audi!

    Joined:
    Apr 5, 2013
    Messages:
    69
    Likes Received:
    1
    Cheers Sam, I'll post a pic
     
  8. toaophil

    toaophil Audi!

    Joined:
    Apr 5, 2013
    Messages:
    69
    Likes Received:
    1
  9. swarcup

    swarcup Well-Known Member

    Joined:
    Sep 9, 2009
    Messages:
    1,323
    Likes Received:
    39
  10. toaophil

    toaophil Audi!

    Joined:
    Apr 5, 2013
    Messages:
    69
    Likes Received:
    1
    Yeah looked at these, should be ok, but measurements are about 1 or 2 mm out from what i make them?

    Are these what you've got Sam?
     
  11. swarcup

    swarcup Well-Known Member

    Joined:
    Sep 9, 2009
    Messages:
    1,323
    Likes Received:
    39
    No mine are different they are just the grey centres without the surround.
     
  12. toaophil

    toaophil Audi!

    Joined:
    Apr 5, 2013
    Messages:
    69
    Likes Received:
    1
    Wonder if they'd fit?
     
  13. dsmclark40v

    dsmclark40v Member

    Joined:
    Sep 24, 2006
    Messages:
    744
    Likes Received:
    11
    Ah yours are rs4's no unfortunately mine are different. Mine are like these ones

     
  14. toaophil

    toaophil Audi!

    Joined:
    Apr 5, 2013
    Messages:
    69
    Likes Received:
    1
    Ah i see. Well I've ordered one of those ones off ebay. Hopefully it'll be ok.

    Any of you guys ever put bigger exhaust trims on?
     
  15. swarcup

    swarcup Well-Known Member

    Joined:
    Sep 9, 2009
    Messages:
    1,323
    Likes Received:
    39
    YES sure have. I hack sawed the old tips off as they were downward pointing and spot welded some stainless ones on
     
  16. toaophil

    toaophil Audi!

    Joined:
    Apr 5, 2013
    Messages:
    69
    Likes Received:
    1
    Cool- i have the two standard 70mm straight trims each side. Look like they're welded on. But i fancy going a bit bigger. .
     
  17. toaophil

    toaophil Audi!

    Joined:
    Apr 5, 2013
    Messages:
    69
    Likes Received:
    1
    Beware of the above- sizes are all correct. But they don't fit.
    Almost wondering if my wheels are reps?
     

Share This Page