1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Over 400bhp Wanted, Whats Needed

Pat Mar 10, 2010

  1. Pat

    Pat Member

    515
    0
    18
    Well I`m still in process I`m sorting suspension out but I`ll will be looking into dropping engine very soon..

    My goal is 400bhp at minimum.. I`ll be looking at a bigger turbo and internals.. but wondered which is best way to go about it..

    My cars about 320 at present but 400 is my benchmark
     
  2. badger5

    badger5 www.badger5.co.uk Site Sponsor

    9,167
    1,790
    113
    read tufftys thread is a good starting point
    engine internals essential and a decent budget for realistic power of this level, done properly
     
  3. finesse

    finesse Active Member VCDS Map User

    2,805
    10
    38
    Shoe horn a B5 RS4 engine.
     
  4. FazS3

    FazS3 Member

    867
    1
    18
    Something like this....

    [​IMG]
     
  5. MURRAYS444

    MURRAYS444 Member

    790
    38
    16
    That car should have been made by audi its that good what was the performance like im sorry if u r used to tellin people just wanna know???
     
  6. FazS3

    FazS3 Member

    867
    1
    18
    Very very very fast....noise was immense...470 bhp insane car, absolutely mental
     
  7. MURRAYS444

    MURRAYS444 Member

    790
    38
    16
    Very nice I saw that you sold it on pistonheads what car u got now and are you gonna put a bigger engine into it??
     
  8. MIKE GTR

    MIKE GTR Member

    366
    1
    16
    Deep pockets and long arms
     
  9. Pat

    Pat Member

    515
    0
    18
    Be k to have a lump like fazs but wanna keep the OE.. Money isnt really an issue as it will be a long term project and have the right contacts..

    Just wanted to know whos actually got some s3,tts running over 400 and whats been done..

    I`m working on suspension at min.. engine will be later this year
     
  10. finesse

    finesse Active Member VCDS Map User

    2,805
    10
    38
  11. <tuffty/>

    <tuffty/> Badger 5 Edition...Its all about the flow... Staff Member Moderator Audi S3

    20,323
    3,489
    113
    GT3071 at least, bigger injectors than 550's, I run 630's but getting close to max duty cycle, large port head then maybe a SEM inlet and 75/80mm throttle body.

    Internals wise, rods is pretty much all you need unless you are up for rebuilding the entire engine... no need to go 2ltr stroker but would advise a head rebuild with supertech valves, springs and retainers.

    Last time I had mine on a dyno, it was producing 383bhp with a boost leak (was running just over 1 bar), a std (original) exhaust system and was over fuelling due to high EGT's.

    EGT issue is now sorted, I have a full 3" straight thorough exhaust and will be running 1.7bar once the new map has been loaded on... no idea what the power will be then but should be in the region of 400bhp...

    Have a read of my thread for some ideas but if you don't mind pushing the boat out a bit, try 483bhp from a similar setup on the Polo built by Badger Bill

    http://www.seatcupra.net/forums/showthread.php?t=218680

    <tuffty/>
     
  12. ianysm

    ianysm Active Member

    1,002
    0
    36
    Had some fun with an Audi TT. Thrashed me

    It was a 480bhp 2.1 litre!
     
  13. JS1500

    JS1500 Howdy

    1,166
    10
    36
    I had some fun with a TT. Thrashed it.

    It was a 3.2 with big exhaust. LOL.
     
  14. finesse

    finesse Active Member VCDS Map User

    2,805
    10
    38
    j5100, what is the standard power of the TT 3.2's ?
     

Share This Page