1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Oil catch can, any recommendation ??

guzzy_431 Oct 31, 2012

  1. guzzy_431

    guzzy_431 Member

    107
    1
    18
    Hey Guys,

    I've seen quiet a few oil catch cans out there on market. I want to make sure I get a good one not Forge one tho hence the price, any suggestion??
    I have scrolled through some of the following threads:

    Super Karls
    Tufftys
    Westys
    Vrb Bobs

    They all seem to have different ones. :uhm:
     
  2. jezzy

    jezzy Member

    768
    16
    18
    ebay cheapos are huge and hard to find space for.
    i personally am looking at this one to fit inline and is very small. although you would need to source 19mm inlet outlets.
    this can would allow for even more simplification of the pcv by allowing the feed form the block and rocker cover straight to the tip.
    So no need for the feed to the can and then back to the tip.
    small oil catch tank Mitsubishi Lancer Evolution Evo Candy Red | eBay
     
  3. richud

    richud New Member

    16
    0
    1
    quite a few people on here have this one. it has 19mm ports suitable for the s3/a3, i ordered one a week ago.

    Unknown Location....Scary!!!
     
  4. g60leigh

    g60leigh Well-Known Member

    1,674
    207
    63
    Has anyone got any pics of where the have installed there catch can and what mounts they have used?
     
  5. guzzy_431

    guzzy_431 Member

    107
    1
    18
    Nice1 jeezy but only thing is the bidding has ended for that catch can, thrgh eBay link sent. I'll be on look out now for 1.
     
  6. jezzy

    jezzy Member

    768
    16
    18
    click the link in the ebay ad and it takes you to there site and there pretty cheap.
     
  7. jezzy

    jezzy Member

    768
    16
    18
  8. guzzy_431

    guzzy_431 Member

    107
    1
    18
  9. Sam_

    Sam_ Down under

    3,037
    480
    83
  10. VAB

    VAB Member

    43
    1
    6
    I used Saikou Michi from US. He is busy but will custom make for same price - quality product
     
  11. S3 Paul

    S3 Paul Well-Known Member Regional Rep

    2,824
    107
    63
    I had mine made to suit where i wanted to fit it...
    Mine is located on the side of the battery box, partialy covered by the battery top cover
     

Share This Page