1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

oil and coolant lines for gt28 71r

jonno123 Feb 5, 2013

  1. jonno123

    jonno123 Member

    99
    7
    8
    Hi

    i need some oil and coolant lines for my gt28 71r for my audi a3 1.8t

    is there any were i can get some other then apt or can i use the std lines on the car ?

    im fitting the turbo in the std place

    any help would be great

    Thanks

    John
     
  2. <tuffty/>

    <tuffty/> Badger 5 Edition...Its all about the flow... Staff Member Moderator Audi S3

    20,813
    3,665
    113
    Be custom jobbers... we always make them to the car... what do you mean std position? what manifold you using? you will need a reducer for the main oil feed as the GT2871r is a BB turbo not a journal bearing...

    Have you looked on ATP Turbo to see if they do anything?

    <tuffty/>
     
  3. Sam_

    Sam_ Down under

    3,029
    477
    83
  4. lloydie1

    lloydie1 Member

    68
    2
    6
  5. superkarl

    superkarl MAN OF STEEL

    9,327
    2,330
    113
    Make your own mate.

    Make sure you get right size lines, 4an for oil feed, 10an for return. Oil feed restrictor for the turbo, and an fittings off of ebay, block and return flanges can be bought from loads of places
     
  6. jonno123

    jonno123 Member

    99
    7
    8
    does any one know what size restrictor i need for my oil feed is 1mm ok ?
     
  7. s3dave

    s3dave TFSI Hybrid Supporter

    10,110
    736
    38
    0.8 i think mate..
     

Share This Page