1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Note: Excessive Comm Errors

Discussion in 'VCDS (formerly VAG-COM) forum' started by Ryanmt, Jun 5, 2010.

  1. Ryanmt
    Offline

    Ryanmt Member

    Joined:
    May 30, 2010
    Messages:
    103
    Likes Received:
    0
    Is there any more information avaliable on this?

    When i do a full scan i get the following



    Address 31: Engine other
    Protocol: KWP2000
    Controller:
    Note: Excessive Comm Errors


    Is it anything to be worried about?

    04 Sline Avant 1.8T Quattro
    #1
  2. JST_A3
    Offline

    JST_A3 Member

    Joined:
    Sep 8, 2007
    Messages:
    98
    Likes Received:
    3
    Please post a full scan so we can see the rest of the information, there's not a lot to go off here....
    #2
  3. Ryanmt
    Offline

    Ryanmt Member

    Joined:
    May 30, 2010
    Messages:
    103
    Likes Received:
    0
    Address 01: Engine
    Protocol: KWP2000
    Controller: 8E0 909 518 AS
    Component: 1.8L R4/5VT 0003
    Coding: 0011711
    Shop #: WSC 63251

    Address 03: ABS Brakes
    Protocol: KW1281
    Controller: 8E0 614 517 A
    Component: ABS/ESP allrad 4529
    Coding: 04475
    Shop #: WSC 06435

    Address 08: Auto HVAC
    Protocol: KW1281
    Controller: 8E0 820 043 AC
    Component: A4 Klimaautomat 1424
    Coding: 00000
    Shop #: WSC 63251

    Address 09: Cent. Elect.
    Protocol: KW1281
    Controller: 8E0 907 279 F
    Component: int. Lastmodul RDW 0517
    Coding: 00001
    Shop #: WSC 63251

    Address 15: Airbags
    Protocol: KWP2000
    Controller: 8E0 959 655 J
    Component: Airbag 8.4EP 1002
    Coding: 0010602
    Shop #: WSC 63251

    Address 16: Steering wheel
    Protocol: KW1281
    Controller: 8E0 953 549 S
    Component: Lenks√°ulenmodul 0611
    Coding: 01012
    Shop #: WSC 63251

    Address 17: Instruments
    Protocol: KW1281
    Controller: 8E0 920 950 N
    Component: KOMBI+WEGFAHRS. RB4 D42
    Coding: 01401
    Shop #: WSC 00000

    Address 25: Immobilizer
    Protocol: KW1281
    Controller: Bit teA dre ss
    Component: e 17 eingeben

    Address 31: Engine other
    Protocol: KWP2000
    Controller:
    Note: Excessive Comm Errors

    Address 33: OBD-II
    Protocol: KWP2000
    Controller: OBD-II/EOBD

    Address 45: Inter. Monitor
    Protocol: KW1281
    Controller: 8E0 951 177
    Component: Innenraumueberw. 0704
    Coding: 00001
    Shop #: WSC 00000

    Address 46: Central Conv.
    Protocol: KW1281
    Controller: 8E0 959 433 BD
    Component: Komfortger√°t TBF 1612
    Coding: 07115
    Shop #: WSC 63251

    Address 56: Radio
    Protocol: KW1281
    Controller: 8E0 035 195 M
    Component: symphony II PM6 0410
    Coding: 01000
    Shop #: WSC 65536
    #3
  4. bearthebruce
    Offline

    bearthebruce Ross-Tech, LLC

    Joined:
    Jul 4, 2006
    Messages:
    332
    Likes Received:
    17
    That is not an autoscan. It is a control map scan. Please post a full autoscan.
    #4
  5. NHN
    Offline

    NHN Modmetractor

    Joined:
    Jan 14, 2008
    Messages:
    27,261
    Likes Received:
    1,223
    It would appear you're possibly scanning a controller that the car doesnt actually support I'd say, as I've never personally seen that module used in your car chassis, so if this is true, then there is no fault, maybe Bruce can advise further if my assumption is correct for your B6.
    #5

Share This Page