1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Nokia Handsfree to Bose HU

Discussion in 'In-Car Entertainment' started by imported_christhick, Feb 7, 2005.

  1. Does anyone know what adaptor I need to fit a Nokia handsfree kit to a Bose head Unit.

    I've been told that I need one as each speaker is amplified individually and when I wired it up it was very loud and I had no control over the volume?

    I've got the mute and power working ok but not the speakers.
     
  2. Google AdSense Guest Advertisement



    to hide this advert.
  3. AndyMac

    AndyMac Moderator
    Staff Member Moderator

    Joined:
    Jun 10, 2003
    Messages:
    9,833
    Likes Received:
    39
    there may well be but it is probably just a line out converter with the correct plug for a concert.
     
  4. Garth_S3

    Garth_S3 Member

    Joined:
    Jan 3, 2005
    Messages:
    243
    Likes Received:
    18
    I've done it!
    This is what you need for a symphony unit:
    http://www.siocommunications.co.uk/06-119B.html
    You have to solder in a 5k resisor for bose equipped units as described at the bottom.

    If you have a different unit, then search on that site and it'll tell you the one you need
     
  5. Garth_S3 - fully agree SIO seem to be great. They put the 5k resistor in line for me before sending it out. Still haven't fitted it in my car as I still can't find a switched power souce.

    Lots of helpful threads on this board, but I can't find a definitive answer for the 8P A3. After spending several hours looking I was none the wiser so if anyone could illuminate me that would be great! /ubbthreads/images/graemlins/smile.gif
     
  6. ascaudio

    ascaudio New Member

    Joined:
    Jan 10, 2005
    Messages:
    22
    Likes Received:
    0
    ok if it helps i have special leads for the audi head units with amplified systems and volume controls
     

Share This Page