No Controller Found

[tfox]

HI,

Ive justt got Vag-com so im still a newb.
The other day I managed to change some settings on my car ok (autolock doors etc etc etc) but when Ive gone to do a friends passat and click on option 35 Central locking it says no controller found....
Ive gone into setting and tested the com port and it sayd 'OK'


Any ideas??

Thanks

Tom

 

[dickys3]

Try controller 46.

 

[dickys3]

Selective Unlocking:

[Select]
[46 - Cent. Conv.] (35 - Cent. Locking for manual window cars)
[Recode - 07]
Write down the existing coding for future reference.
Enter 5-digit code from below
[Do It!]

Look at the existing Soft. Coding. If you have selective unlocking (press the unlock button on the remote once to open the driver's door, twice to open all the doors) the last digit of your coding should be an odd number. To make all doors unlock, add 1 to the coding.

Lock/Unlock Horn/Flash:

[Select]
[46 - Cent. Conv.] (35 - Cent. Locking for manual window cars)
[Adaptation - 10]
Channel (03..08)
Adaptation Value (1 = on, 0 = off)
[Save]

Channel 03 Auto Lock
Channel 04 Auto Unlock
Channel 05 Unlock, horn sounds
Channel 06 Lock, horn sounds
Channel 07 Unlock, turn signals flash
Channel 08 Unlock, turn signals flash

 

[Grant]

Newer cars don't use 35-Central Locking, they use 46-Central. Conv.

 

[tfox]

Thanks all,

I'll try it tomorrow

Tom

 

[tfox]

HI All,

Ive managed to connetc to the car now but it seems the codes are different. The base code on this car was 0258. When i type in another number such as 07918 it just goes back to the main menu. Are there different numbers for newer cars??

Cheers again guys!

Tom

 

[dickys3]

[ QUOTE ]
HI All,

Ive managed to connetc to the car now but it seems the codes are different. The base code on this car was 0258. When i type in another number such as 07918 it just goes back to the main menu. Are there different numbers for newer cars??

Cheers again guys! Tom

[/ QUOTE ]

Sorry if the above was misleading. You need to make a note of the base code and then add/subtract the following codes to get what you want.

+4 One touch unlock
+32 Autolock doors above 15mph
+64 Window Up/Down with remote
+1024 Honk horn on alarm arm

Example:

Select module 46. Choose Recode. Make a note of the software coding.

If the software coding is 12705 and you want to add the alarm beep, change the code to 13729 (12705+1024).

Hope this helps.