New RS style grill

the_muzza

Registered User
Joined
Sep 5, 2016
Messages
119
Reaction score
63
Points
28
Picked this up from XenonzUK. It's in the style of the newer RS models with the smaller mouth style grill and Quattro badge with the smaller mesh behind it. Fits like a dream and really smartens up the front end. I have front parking sensors on mine as I have the parking system plus and the grill came with the correct brackets for it. Also put a bit of cheap EZ-lip on as a make shift splitter which looks alright. Thought I'd share with you guys. And yes my car is a Quattro before anyone mentions it :)
 

Attachments

  • IMG-20171022-WA0039.jpg
    IMG-20171022-WA0039.jpg
    450.5 KB · Views: 213
  • IMG-20171022-WA0040.jpg
    IMG-20171022-WA0040.jpg
    435.3 KB · Views: 204
  • IMG-20171022-WA0038.jpg
    IMG-20171022-WA0038.jpg
    418.1 KB · Views: 219
  • Like
Reactions: PenttisHSR, xpoweruk, IRONy_MAN and 4 others
Looking good.
The newer style is nice :)
 
loving that been playing with the idea and you have just made my mind up
 
Piece of cake. Peel back the wheel liners, didn't even need to take wheels off. Get in there and undo the two 10mm nuts. Then four bolts across the top cooling panel under the bonnet. Then about six torx screws under neath. Hardest part was wrapping the slam panel in black vinyl and resecuring the parking sensor wires. Also you have to unclip the fog lights aswell. People do this when the bumper is off and hanging but you can do it from the arch when you take the 10mmbolts out. There are also about ten torx screws holding the grill in the bumper. I did it on my drive in the rain in about 1h30mins
 

Similar threads