1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

New Member with a 3.2 and a couple of questions

Discussion in 'A3/S3/Sportback (8P Chassis)' started by vacant, Oct 4, 2012.

  1. vacant
    Offline

    vacant New Member

    Joined:
    Sep 10, 2012
    Messages:
    18
    Likes Received:
    2
    [Oct 4, 2012]
    Hi all, I've had a bit of a lurk but thought I should probably post some pics. I've got a 2006 3.2V6 DSG which I've had for a few months.

    IMG_0427.jpg IMG_0423.jpg IMG_0425.jpg IMG_0330.jpg

    I'm afraid not much will happen mod-wise as it's a second car so i cant justify throwing too much money at it (aside from tax and fuel!) but I've added the LCR Splitter and Black Grill. The brakes will be replaced shortly then i must stop spending!


    My couple of questions are: What badge do I need to fit this? My old S-Line badge is far too big to fit, and the quattro badge I purchased is an older type. Does it need to be an S3 Badge? If so, can I bodge the S-Line bit to the S3 backing as I dont want to pretend it's something it isnt.

    IMG_0429.jpg

    Also, my car has the shark fin rear aerial thing and a phone cradle - but it doesnt seem to have bluetooth or anything like that as far as I can tell. Is the cradle/aerial a remnant of something long since removed?
    #1
  2. Ads

    Ads

    [Oct 25, 2014]

  3. screechmr2
    Offline

    screechmr2 Member

    Joined:
    Jul 29, 2012
    Messages:
    58
    Likes Received:
    11
    [Oct 4, 2012]
    it's a quattro badge that goes on the front grille.

    is it not just an aftermarket phone cradle?
    #2
  4. Sandra
    Offline

    Sandra MODERATOR Staff Member Moderator

    Joined:
    Sep 12, 2010
    Messages:
    16,512
    Likes Received:
    2,498
    [Oct 4, 2012]
    Hi, welcome to audi-sport.net. Where are you located? Have a look at the faqs threads at top of the page, lots of information to be found. Hope you enjoy the forum. :) x
    #3
  5. Artimus
    Offline

    Artimus Short Back

    Joined:
    May 9, 2012
    Messages:
    1,898
    Likes Received:
    369
    [Oct 4, 2012]
    The phone holder is a factory fitted option, you need to buy a phone model specific cradle & clip it on to the holder - which will then charge your phone and connect you to the shark fin for better reception.

    It may well have Bluetooth, but you have to search for the signal when you first switch the ignition on, as it shuts down pretty sharpish if no phone connects.

    Different mount type badges are available for peanuts from e-bay\Amazon.
    #4
  6. 3.2 Ju
    Offline

    3.2 Ju Well-Known Member

    Joined:
    Jul 22, 2007
    Messages:
    1,345
    Likes Received:
    76
    [Oct 4, 2012]
    As above, but don't hold your breath on a compatible cradle as just about the only supported newish phone is the iphone

    Nice car by the way, will always have a soft spot for the 3.2!
    #5

Share This Page