1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

NEED IGNITION LIVE FOR HANDS FREE?

AUDIISBEST54321 Jan 11, 2008

  1. AUDIISBEST54321

    AUDIISBEST54321 New Member

    24
    0
    1
    Hi, I'm a new member can any one help:- I have A4 TDI, avant on 04 plate. I'm trying to fit a parot ck3100 hands free kit. I have used ISO conectors which came suplied, but it's not working. I've been told I need an ignition live, as well as the permanent live which supplies the radio, any idea where I can get ignition live from? thanks CJ:keule:
     
  2. mavala

    mavala Oops!!!!

    39
    0
    6
    On the Parrot wiring loom, you have 2 wires with a fuse holder in-line.
    You need to swap the 2 wires going in to the 2 fuse holders to sort out your problem
     
  3. AUDIISBEST54321

    AUDIISBEST54321 New Member

    24
    0
    1
    Have already tryed that, before shamlessley going into halfords for some free advice.( GOD LOVES A TRIER!) This is were the ignition live idea came from.
    Have just been reading some old forums, seems as if i need to find a thin red wire under the stearing colum? If this is the case can I cut it, conect using terminal block adding new wire, and insert new wire into the ISO block which used to go into the back off the radio (which is now in the parot ISO adapter) I think this would give me a ignition live? If this is the case, would I need a realy in the new wire? thanks
     
  4. TDI-line

    TDI-line Uber Post Whore Team Floret Silver quattro Audi A3 Black Edition TDi

    9,256
    479
    83
    Hello and welcome.

    Try having a look at one the technical sections or the ICE part, good luck.
     
  5. AUDIISBEST54321

    AUDIISBEST54321 New Member

    24
    0
    1
    Where would I find this info? Thanks
    :Flush:
     
  6. Issac Hunt

    Issac Hunt Active Member VCDS Map User

    1,162
    1
    36
    Look under the dash at the drivers side next to the fusebox area, There are several, (3 Maybe?) red wires that terminate on the bottom. These should be igntion live. Check with a multimeter to make sure you got the right one. They are fused already and wont need relays.

    Its difficult to describe the location exactly but if you remove the drivers side lower dash trim, its only a few 8mm bolts, you'll see where I mean quite easily.
     
  7. L1 HCS

    L1 HCS Active Member

    4,600
    6
    36
    Welcome to the forum CJ.
     
  8. AUDIISBEST54321

    AUDIISBEST54321 New Member

    24
    0
    1
    Hello and thanks all, Got it wired in so hands free goes off when key is taken out. Old threads were great help to. Just need to work out how to get rear speakers to go off when call comes in. Will post new thread. Thanks CJ.:)
     
  9. mavala

    mavala Oops!!!!

    39
    0
    6
    And this is when you tell people how you did it.
    So, when the next guy with the same problem has a look on this forum, he can find the answers without having to ask the same questions again.
     
  10. AUDIISBEST54321

    AUDIISBEST54321 New Member

    24
    0
    1
    :asskicking: Will do Mav, no probs. cheers
     
  11. acano

    acano Member

    108
    0
    16
    bump

    so how did you do it and how did you get the rear speakers sorted?
     

Share This Page