1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  1. Lee Goodall

    Lee Goodall Active Member

    2,279
    4
    38
    Am I correct in thinking that the N75 connection to the TIP is just a recirc?

    As long as the connections to the actuator and turbo are in place the TIP connection could just go to atmosphere?
     
  2. aragorn

    aragorn "Stick a V8 in it!" Staff Member Moderator VCDS Map User

    17,956
    701
    113
    Its a bleed connection, so yes atmosphere would work, however it would then give you similar issues to that of a vacuum leak or split hose as your leaking metered air.
     
  3. Lee Goodall

    Lee Goodall Active Member

    2,279
    4
    38
    Yeah.. you think the amount of air that it bleeds off would cause running issues?

    It will be a lot easier for me to let it go to atmosphere but I think I'm just being lazy and cheap lol.
     
  4. aragorn

    aragorn "Stick a V8 in it!" Staff Member Moderator VCDS Map User

    17,956
    701
    113
    Well i cant see it being any different to a split vac hose?

    Pretty small splits can mess up your idle and your fuelling quite a bit?
     
  5. Lee Goodall

    Lee Goodall Active Member

    2,279
    4
    38
    True.. I'll see what hoses are available.. must be something to suit.
     

Share This Page