1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

my ibis white s3>>> 2007 facelift to 2011 spec - Now With New Pics.

S3 syc Nov 19, 2012

  1. S3 syc

    S3 syc Active Member

    154
    29
    28
    alright peeps,
    thought i would put a thread up about my 2007 s3.

    ibis white with big seats, flat bottom wheel and milenium edition sat nav standard.

    so far in the 2 years ive had it ive had....
    amd stage 2 custom map
    full miltek turbo back with miltek race cat
    h&r springs
    currently on 19" helios in gloss black but dont have any pics yet
    biggest mod so far was the full facelift to 2011 spec front end.
    i still have the tailgate and mirrors to change over the winter.

    heres a few pics of the car from start to finish.
    enjoy!

    [​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG]
     
    Last edited by a moderator: Mar 12, 2013
    Raiden, neiller, DeeGee68 and 4 others like this.
  2. Sandra

    Sandra Moderator Staff Member Administrator Moderator TeamMisano TFSI Owners Group Audi S3 quattro s tronic Platinum Supporter

    26,449
    9,441
    113
    ​Looking very good. :) x
     
  3. RedDejavu

    RedDejavu Well-Known Member

    1,806
    337
    83
    amazing effort! Well done car looks lovely
     
  4. Ironborn

    Ironborn English...not so good

    1,179
    227
    63
    Nice love it, did you do the conversion yourself? You need the wing mirrors or mot is a no go.
     
  5. A3_Black_Edition

    A3_Black_Edition Member

    417
    19
    18
    Stunning car mate!

    Cracking amount of work!

    Enjoy!

    Si
     
  6. S3Frosty

    S3Frosty Member

    51
    2
    6
    are they rotiforms ?? how much i need
     
  7. S.

    S. Well-Known Member Team Ibis TFSI Owners Group Audi S3 quattro Manual

    1,986
    540
    113
    great job!!!
     
  8. Brodster

    Brodster Well-Known Member Team Ibis VCDS Map User Audi S4 Audi Avant Owner Group

    3,548
    883
    113
    Yahooo!! Another Ibis White S3 to add to the club.....lol
     
  9. rOb_A

    rOb_A Active Member

    1,488
    63
    36
    you got your seats in yet Mark? :sign_pics:
     
  10. LauAlf

    LauAlf Member

    45
    1
    8
    If thou wilt meter exterior mirrors with Flashes, engines or exchanges of glasses with wiring port complecta, including locks.

    Or more so easy and cheap alloy wire harness inside the car, it passes right next to the grommets at the door :)

    I did it a little time in the car of a friend of mine.
     
  11. Donny_DJ

    Donny_DJ Active Member

    407
    109
    43
    Looks really nice mate, great work, although i'm not a massive fan of the black rings on the front - just looks dirty :O!
     
  12. Donny_DJ

    Donny_DJ Active Member

    407
    109
    43
    How much did that conversion cost ya in total btw buddy?
     
    notta3 likes this.
  13. pinterovski

    pinterovski Member

    667
    88
    18
    Put the rings back on! Other than that it's a lovely car:beerchug:
     
  14. pod_4

    pod_4 Member

    73
    3
    6
    Good work mate. Get some pics up with the helios on..
     
  15. STIG

    STIG Member

    30
    3
    6
    very tidy
     
  16. nil538

    nil538 Active Member

    497
    66
    28
    Looks spot on mate
     
  17. JamesS4cab

    JamesS4cab Well-Known Member

    1,190
    94
    48
    Love it. How hard was it?
     
  18. S3 syc

    S3 syc Active Member

    154
    29
    28
    cheers for the feedback guys yea did the work myself with the help of some hardworking mates lol. wasnt too bad of a job although did have to make some new brackets for the wings as they fit totally different to the original ones and obviously have the drl,s programmed in on vagcom,i have tweaked the wings a little since these pics as i wasnt happy with the gaps and have also just put 19inch phaeton helios,s on so will upload some new pics this weekend.with regards to the grill badge been painted im not a massive fan myself but this was already done and havent got round to buyin a new one yet.
     
  19. AjayB

    AjayB MK5 Golf GT

    68
    3
    6
    I see this car all the time driving around Bradford. It looks great :icon_thumright:
     
  20. S3 syc

    S3 syc Active Member

    154
    29
    28
    cheers bud, cant make your profile pic bigger to see if i know your car but yea im usually out and about in bradford.
     
  21. S3 syc

    S3 syc Active Member

    154
    29
    28
    plan on getting some new pics this week mate
     
  22. big harty

    big harty Member

    307
    15
    16
    Looks fantastic mate wot the rough cost of facelift as I'm thinking about doing it to my s3.
     
  23. S3 syc

    S3 syc Active Member

    154
    29
    28
    To be honest most of the parts are off of my brothers car which was written off in a rear end smash so couldn't really give you a true figure as all I had to source was the front bumper,grill and headlights although to buy the wings along with slam panel,bumper bar and a few other parts ud need I'd say roughly 2k you could do the work yourself as its fairly straight forward apart from having to make new wing brackets as they fit in a different place and also code the drl,s in on Vagcom.
     
  24. jamo182

    jamo182 New Member

    22
    6
    3
    Hi i have a 57 plate S3 and wanted to fit the led lights is it a straight fit or do you have to change panels and wiring of the car. also were did you get the lights from.

    Thanks
     
  25. a3glenn

    a3glenn 6th gear

    99
    7
    8
    love the car,

    just about to do the same, did you have to change the bonnet hinge's
     
  26. S3 syc

    S3 syc Active Member

    154
    29
    28
    yes mate changed the hinges aswell there's a few little bits and bats you wouldn't think would be different but are. Well worth it though.
     
  27. audi_k

    audi_k Member

    41
    2
    8
    how long did it take to do the change? great job btw
     
  28. N8

    N8 Kowalski Details VCDS Map User

    17,163
    718
    113
    Any update on the mirrors?
     
  29. S3 syc

    S3 syc Active Member

    154
    29
    28
    Not as yet but i bought Ian's grill instead oops lol. Will have some ready for ultimate dubs I would've thought. U got any new plans at the mo?
     
  30. N8

    N8 Kowalski Details VCDS Map User

    17,163
    718
    113
    He mentioned you were gonna buy it well done :wub:
     
  31. S3 syc

    S3 syc Active Member

    154
    29
    28
    After the front splitter to match but struggling to find someone who can get it done in a decent timescale.
     
  32. a3glenn

    a3glenn 6th gear

    99
    7
    8
    did you need to change the arch liners?
     
  33. S3 syc

    S3 syc Active Member

    154
    29
    28
    No mate the liners are the same,good job really as I forgot to get the newer ones.
     
  34. a3glenn

    a3glenn 6th gear

    99
    7
    8
    ah thats good, i have done the same lol,
     
  35. N8

    N8 Kowalski Details VCDS Map User

    17,163
    718
    113
    Front is different, rear is the same.
     
  36. S3 syc

    S3 syc Active Member

    154
    29
    28
    my liners havent been changed and there absolutley fine.
     
  37. a3glenn

    a3glenn 6th gear

    99
    7
    8
    fingers crossed then:)

    one more thing, the bonnet hook, this is needs to be changed as well?? i did hope to get one with the bonnet but the tight seller took it off.
     
  38. Ironborn

    Ironborn English...not so good

    1,179
    227
    63
    This is something I want to do as well, they used to be a big list with all the part numbers, but for the life of me I can't it :uhm: Poor searching skills no doubt
     
  39. a3glenn

    a3glenn 6th gear

    99
    7
    8
    And all of this :

    8P0 821 469 - Wing Bracket Rear QTY:2 £1.09
    8P0 821 467 - Wing Bracket Center QTY:2 £1.09
    8P0 821 471 - Wing Bracket Front QTY:2 £1.34
    8P0 823 301 B - Bonnet Lid Hinge -Left £8.54
    8P0 823 302 B - Bonnet Lid Hinge -Right £8.54
    8P0 821 171 G - Wheel Housing Liner , Plastic -Left £16.00
    8P0 821 172 G - Wheel Housing Liner , Plastic -Right £16.00
    8P0 821 192 B - Wheel Housing Liner , Plastic -Left £12.21
    8P0 821 192 D - Wheel Housing Liner , Plastic -Right £12.21
    8P0 853 888 B - Mud Guard Spoiler - Right - £5.82
    8P0 853 887 B - Mud Guard Spoiler - Left - £5.82
    8P2 823 531 G - Lid Lock Cable £5.53
    8P0 807 183 A - Front Bumper Guide £4.32
    8P0 807 184 A - Front Bumper Guide £4.32
    8P0 807 863 A -Securing Strip £1.64
    8P0 807 864 A -Securing Strip £1.64
    8P0 823 509 H Lid Lock with Micro-switch £32.22
    8P0 805 588 L -Lock Carrier with mounting for coolant radiator -Comes with headlight sockets -£206.95

    all i could find, its hard serching
     
  40. a3glenn

    a3glenn 6th gear

    99
    7
    8
    well today i did my 2012 frontend, have to say you made it look easy work,

    had a lot of problems lining the wings up with the bonnet line, how did you fit the wings? any advice would be great

    cheers
     

Share This Page