1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

my first VCDS lite scan

Discussion in 'A3/S3 Forum (8L Chassis)' started by Lavis89, Sep 19, 2012.

  1. Lavis89
    Offline

    Lavis89 Active Member

    Joined:
    Aug 18, 2011
    Messages:
    856
    Likes Received:
    150
    [Sep 19, 2012]
    VCDS-Lite Version: Release 1.1
    Wednesday, 19 September 2012, 16:48:00.

    Chassis Type: 8L - Audi A3/S3
    Scan: 01,02,03,08,15,16,17,22,35,37,45,55,56,57,75,76

    -------------------------------------------------------------------------------
    Address 01: Engine Labels: 06A-906-032-AJQ.LBL
    Controller: 06A 906 032 HN
    Component: 1.8L R4/5VT 0001
    Coding: 10710
    Shop #: WSC 01236
    VCID: 719556C728A7
    WAUZZZ8L021002082 AUZ5Z0A6265128
    3 Faults Found:
    17544 - Fuel Trim: Bank 1 (Add): System too Lean
    P1136 - 35-00 - -
    17705 - Shareware Version. To Decode all DTCs
    P1297 - 35-00 - Please Register/Activate
    16825 - Shareware Version. To Decode all DTCs
    P0441 - 35-10 - Please Register/Activate - Intermittent
    Readiness: 0000 0001
    -------------------------------------------------------------------------------
    Address 03: ABS Brakes Labels: Redir Fail!
    Controller: 1C0 907 379 F
    Component: ESP ALLRAD MK60 0104
    Coding: 0023046
    Shop #: WSC 01236
    VCID: 2D2D8AB7F41F
    No fault code found.





    Cleaned the maf since i scanned, is it possible to reset codes with lite? i guess i'll have to get a smoke test to find out about the other 2 codes. at least there doesn't seem to be anything majourly wrong here :)
    #1
  2. Ads

    Ads

    [Dec 18, 2014]

Share This Page