1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

My Decatted Milltek exhaust has arrived!

Rabbit222 Apr 22, 2008

  1. Rabbit222

    Rabbit222 Active Member

    708
    125
    43
    I'm quite stoked! It gets fitted tomorrow and I hope that the gains are decent! Come on REVO...I need that stage 2 map already:w00t:

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  2. Boydie

    Boydie Guest

    0
    0
    0
    If you are polishing the tips of the exhaust make sure you are not too hard on it as the miltek logo is only a print :(

    not for road use?? i dont think mine said that on it! :S
     
  3. Rabbit222

    Rabbit222 Active Member

    708
    125
    43
    Thanks for the headsup :sm4:

    My system is decatted hence the not for road use...
     
  4. warren_S5

    warren_S5 Moderator Staff Member Moderator VCDS Map User

    7,210
    2,487
    113
    Mental. Very nice. Will it get used on road??!?!
     
  5. newbiecrg

    newbiecrg windsurfer

    1,328
    0
    36
    Anyone done this in the UK?

    I would be interested in knowing how to pass an MOT with that exhaust....

    Pedro
     
  6. jonnyc

    jonnyc Member

    858
    1
    16
    When I had my downpipe changed to a de-cat on my Mk5 GTI I had problems running REVO software (stage 2)

    I was running the full Milltek system with sports cat (car running perfectly) and then got the cat removed looking for more power torque and response..

    With the increased flow the car often encountered the fuel/boost cut problem, and to be honest apart from reducing spool time between gears there was no noticeable performance gain over the Milltek (HJS 200cell) sports cat downpipe..

    It does give a lovely aggressive note to the exhaust though, and flames too..

    Let us know how you get one once you have it fitted, hopefully the S3 wont encounter the same problems as my GTI did!

    Jonny
     
  7. Rabbit222

    Rabbit222 Active Member

    708
    125
    43
    [
    Stock vs Milltek
    [​IMG]
    Stock S3 exhaust
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  8. Rabbit222

    Rabbit222 Active Member

    708
    125
    43
    [​IMG]
    [​IMG]
     
  9. Rabbit222

    Rabbit222 Active Member

    708
    125
    43
    The zorst has been fitted :D Hows that for bolt on, bolt off 8)

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  10. Rabbit222

    Rabbit222 Active Member

    708
    125
    43
    [​IMG]
     
  11. jonnyc

    jonnyc Member

    858
    1
    16
    So hows it running?? looks great, much prefer that style of tail pipe to the twin 90mm that Milltek also produce..

    How come you took the prop fully out?! I just dropped the front and the downpipe went it easy..

    Jonny
     
  12. N8

    N8 Kowalski Details VCDS Map User

    17,163
    718
    113
    Johnny C u get any bigger pics of your car??
     
  13. N8

    N8 Kowalski Details VCDS Map User

    17,163
    718
    113
    My cousin has milltek exhaust with sports cat and 3" downpipe running 330bhp and the noise is unreal. Really unique sound. Love it :gun2:
     
  14. jonnyc

    jonnyc Member

    858
    1
    16
    The picture in my sig is not actually my car, its what my car will be looking like in a week or so though..

    I did a Photoshop image to see what I was going to go with and just thought I would use it..

    Dont have the big version now though as my computer decided to s**t itself and I have lost everything..

    Ill make sure I post up some pics as soon as its finished though..

    Jonny
     
  15. N8

    N8 Kowalski Details VCDS Map User

    17,163
    718
    113
    My cousin's TT has the same them you see. Were spraying a red line on his BBS CHs (which are black) and his car is red with the new PPI black grille. Looks awesome!
     
  16. boggysv

    boggysv Member

    573
    0
    16
    Very nice. Do you have any before & after dynos? What other mods do you have?

    I dont see a decat option on their site, did you custom order these?
     
  17. yahyar

    yahyar Member

    63
    5
    6
    very nice rabbit
    will the change in back-pressure affect your boost in any way?
     
  18. S3JET

    S3JET Member

    79
    0
    6
    Will be very interesting to see how loud it is.

    By any chance you can post up a clip on here or youtube?
     
  19. Defratos

    Defratos You’re Dethpicable!!

    2,232
    0
    36
    Very nice system Rabbit, the system was made in the UK? I never knew it was made in the UK I would of thought it came from the Continent
     
  20. Rabbit222

    Rabbit222 Active Member

    708
    125
    43
    Hey Jonny,

    I have fitted the Autotech fuel pump as well. What should I be on the lookout for regarding the fuel cut issue?

    They removed the propshaft because they said it made the install alot easier. The car is going like an absolute beast! It's insanely fast!

    @ boggysv, I will hopefully do a dyno run later this week. I.

    @yahyar, Not really sure mate..will check what VAGCOM says...

    @S3Jet, will do so later today...

    @Defratos, yup the system was a custom decat system built by Milltek UK. Workmanship is unbelievable and the tone of the zorst is stunning!
     
  21. S3JET

    S3JET Member

    79
    0
    6
    That will be great, can't wait to hear that.

    and would be nice to know the dyno too.

    good job.
     
  22. mattfinn

    mattfinn There ain't no party like an S-Club Party.

    837
    18
    18
    Hehe, that is gonna be sweet! De-cat all the way, are your emission tests as tight over there, if you have a test that is?
    Love the 'Not for road use' when it blatantly is gonna be used for exactly that!! That is gonna pop, bang and flame like a trooper!!
    We will be needing lots of vids mate!!
     
  23. jonnyc

    jonnyc Member

    858
    1
    16
    Just I only had my problem once I had de-catted my car so was just giving you the heads up..

    With the fuel pump upgrade and the s3 injectors and different boost characteristics of the K04 you will probably be ok..

    I was considering going with a de-cat but in the UK its not legal and I cant be bothered with the problems that I would get into if it was noticed..

    Im running a Milltek sports cat down pipe with a very unrestrictive rear section, sound is amazing with the k04, much different to my previous GTI..

    Keep us posted on the dyno results, good luck!

    Jonny
     
  24. Rabbit222

    Rabbit222 Active Member

    708
    125
    43
    lol!

    Our emission laws are not yet as strict as you guys but hey...nobody will be checking my car anytime soon :sm4:

    Will try my best to get those vids mate ;)

    @ Jonnyc, definitely sounds way better than what my GTI sounded too...its so damn addictive!
     
  25. S3JET

    S3JET Member

    79
    0
    6
    :anbet:Video Video !!!!!! :blackrs4:
     
  26. richs2891

    richs2891 I cant spell !

    441
    3
    18
    You have taken some very good pictures there ! Would be interested in knowing the gains you have got from the full system as well !

    Richard
     
  27. Macs

    Macs Member

    108
    0
    16
    Any Video available? :unsure:
     
  28. Kris

    Kris Member

    220
    0
    16
    :iagree:
     
  29. Rabbit222

    Rabbit222 Active Member

    708
    125
    43
    Apologies guys, will do my best to get it done this weekend.
     
  30. jonnyc

    jonnyc Member

    858
    1
    16
    What software are you running with the downpipe?

    And did you run with the de-cat downpipe and non de-cat software at all?

    Im wandering If you de-cat the car does it just bring a light up or will it send the car into limp mode?

    Any feedback would be helpful :D

    Also lets see the vids ; )

    Thanks

    Jonny
     
  31. S3JET

    S3JET Member

    79
    0
    6
    Rabbit do you might if i ask you how much you pay for the full system???

    if you don't mind can you please PM me, or if anyone know??

    i am in australia. and just got it quote for 4100 AUD..... non-resonated system.
     
  32. Rabbit222

    Rabbit222 Active Member

    708
    125
    43
    Hey Jonny, apologies man! Just been really hectic on my side...

    Still running REVO Stage1...hopefully Kev will have a new map for me soon *hint hint, nudge nudge* Have to admit though, the car is pulling unbelievably well! I am running a full decat system and have no issues with engine check errors at all. I havn't had any limp mode issues either...

    Regarding the Forge DV, difficult to say whether its a worthy mod or not. Car feels alot more aggressive with it fitted...more like a surge tbh. My intake is quiet with only a slight sneeze with the stock DV but the Forge DV amplifys that by triple. I can only assume that this is because the Forge DV is mechanical and not electronic like the stock item.
     
  33. Rabbit222

    Rabbit222 Active Member

    708
    125
    43
    R11500 South African rands.
     
  34. jonnyc

    jonnyc Member

    858
    1
    16
    Ah ok, thats interesting about your car not having an CEL up after running de-cat..

    When you say the Forge DV created surge do you mean acceleration surge? So the boost was no longer smooth as it was before the install?
     
  35. Macs

    Macs Member

    108
    0
    16
  36. S3JET

    S3JET Member

    79
    0
    6
    R11500 South African Rands only for full system, which is only 1563 AUD.....

    Is that abit too cheap??
     
  37. JohnS3

    JohnS3 Active Member

    3,032
    5
    38
    Videos please??
     
  38. phantom

    phantom On Boost

    1,750
    0
    36
    I know the Revo stage 2 ( for exhaust ) is very nearly ready , i know of one car it's going on today! :ninja:

    p
     
  39. Macs

    Macs Member

    108
    0
    16
    Up!

    I'm craving for those videos...:yes:
     
  40. Amchlolor

    Amchlolor Active Member

    5,604
    4
    36
    'Not for road use' stamped all over it.
    Grow up, for christ's sake.:keule:
     

Share This Page