1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

My B7 S-Line 2.0T

Dwayne 1.8T Feb 25, 2014

  1. Dwayne 1.8T

    Dwayne 1.8T Member

    34
    6
    8
    Hi guys. My name is Dwayne. I'm from Johannesburg in South Africa. I currently own a 2006 B7 2.0T S-Line. I purchased it in Sept 2013 after previously owning a 9n3 Polo GTI...

    Quite alot has been done since then. I will add all the pics I have as I go along. ..

    View attachment 28318

    This was the 1st time I saw her. It was traded in here at work. I work at a BMW dealer.

    View attachment 28319

    A pic of my Polo and the Audi...

    So after taking it home, 3 days later I had trouble with it. At 3000rpm the power would just die. So to cut a long story short, I replaced the HPFP as the N276 was cracked and the piston tip was toast. The follower was also worn so it was replaced. 6.6bar fuel filter and RS4 valve was fitted... eventually the main cause was a worn cam follower lobe on the intake cam...

    View attachment 28321

    After the fueling issue being sorted I loaded Unitronic Stage 2 software, flashed by Yosh at Dark Artz Performance. I had the downpipe fabricated before the map was loaded. Its a custom downpipe fabricated by my mate Nishen at TMSS Motorsport.
     
    Last edited: Feb 25, 2014
    Furkz likes this.
  2. Molnboman

    Molnboman Well-Known Member

    1,338
    194
    63
    Hej Dwayne
    Welcome to the Forum. Quite a story you have there with your engine woes....glad they are fixed now. Might just me, but I can't seem to open those images you posted.

    BR
    Allan
     
  3. Dwayne 1.8T

    Dwayne 1.8T Member

    34
    6
    8
    Rides thread continued. .

    uploadfromtaptalk1393321160294.jpg

    uploadfromtaptalk1393321208228.jpg

    uploadfromtaptalk1393321257494.jpg

    Absolute flawless craftsmanship!!

    Shortly after doing all this the cluth started slipping with the extra power. So I pulled the gearbox quick here at work one evening and fitted a new clutch kit. ..

    uploadfromtaptalk1393321376873.jpg

    Then a few more small things were done....

    uploadfromtaptalk1393321439161.jpg
    New snub mount vs old rubbish

    uploadfromtaptalk1393321483600.jpg
    Joey mod the headlights

    uploadfromtaptalk1393321539946.jpg
    Blacked out grille

    uploadfromtaptalk1393321618830.jpg
    Eventually did a dyno run on normal pump gas, made 230whp.... very chuffed....

    uploadfromtaptalk1393321826394.jpg
    Custom induction that I made and painted tappet cover...

    More pics to follow this evening... loads to upload...
     
  4. Dwayne 1.8T

    Dwayne 1.8T Member

    34
    6
    8
    Thanx Allan... uploading these pics through tapatalk... will try upload them again. .. stupid net work lol
     
  5. Dwayne 1.8T

    Dwayne 1.8T Member

    34
    6
    8
    uploadfromtaptalk1393322070573.jpg

    uploadfromtaptalk1393322104056.jpg

    uploadfromtaptalk1393322135533.jpg

    Pics uploaded again from first post....
     
  6. Dwayne 1.8T

    Dwayne 1.8T Member

    34
    6
    8
    So I decided to respray my mag wheel center caps, as they were peeling badly... changed the chrome bits too

    uploadfromtaptalk1393327192885.jpg

    Heatsoak has been a problem for me and the twin cooler setup was just not cutting it. I had my fmic from my polo (550x180x65) so I decided to fit it in the Audi. My mate at TMSS Motorsport also did the boost piping for me...

    uploadfromtaptalk1393327391101.jpg

    uploadfromtaptalk1393327436023.jpg

    uploadfromtaptalk1393327590257.jpg

    uploadfromtaptalk1393327612679.jpg

    uploadfromtaptalk1393327640417.jpg

    uploadfromtaptalk1393327663498.jpg

    uploadfromtaptalk1393327689954.jpg

    uploadfromtaptalk1393327716235.jpg

    Car feels much better now. Also adjusted the actuator a tad... its like a different car now....
     
  7. DrSasso

    DrSasso Active Member

    207
    32
    28
    that's some tasty pipe work with the new cooler :D forgot these cars have a smaller intercooler in each wing :p
     
  8. Dwayne 1.8T

    Dwayne 1.8T Member

    34
    6
    8
    the smaller coolers were not bad to be honest. But for my future plans they will not cut it :sly:
     
  9. DrSasso

    DrSasso Active Member

    207
    32
    28
    always good to plan ahead ;)
     
  10. Dwayne 1.8T

    Dwayne 1.8T Member

    34
    6
    8
    Its costs less in the long run lol
     
  11. Molnboman

    Molnboman Well-Known Member

    1,338
    194
    63
    Some seriously nice welding there Mucker. Nice one.

    BR
    A
     
  12. Dwayne 1.8T

    Dwayne 1.8T Member

    34
    6
    8
    A few pics from our VW club night photoshoot...

    uploadfromtaptalk1393790464295.jpg

    uploadfromtaptalk1393790534808.jpg

    uploadfromtaptalk1393790561327.jpg

    uploadfromtaptalk1393790582910.jpg

    uploadfromtaptalk1393790617713.jpg

    Still waiting for a few more oics to come from our photographer... will post them as soon as I get them...

    Thanx for looking!
     
  13. MIGGZ

    MIGGZ nanananananananan BATMAN

    1,462
    304
    83
    such small pics!!!!! have i taught you nothing!
     
  14. Dwayne 1.8T

    Dwayne 1.8T Member

    34
    6
    8
    Click on them idiot... makes them beeega
     
  15. MIGGZ

    MIGGZ nanananananananan BATMAN

    1,462
    304
    83
    aint no one got time for that!
     
  16. Dwayne 1.8T

    Dwayne 1.8T Member

    34
    6
    8
    aint no one got time for photoshop... :puke2:
     

Share This Page