1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Milltek On A Bigish Diesel, Has anyone got any experience?

Discussion in 'A4/A4 cabriolet/S4 forum(B6 chassis)' started by Hanzo, Aug 7, 2011.

  1. Hanzo

    Hanzo New Member

    Joined:
    Apr 12, 2011
    Messages:
    29
    Likes Received:
    0
    I recently heard one of these with a milltek

    3.0 v6 tdi with milltek cat back

    and wondering if anyone has fitted one to the older 2.5 v6 tdi

    Previously i was only interested for aesthetic reasons but the sound is incredible considering it a diesel.

    Now what i was quoted for was the following

    B6 A4 V6 TDI
    Cat-back

    MSAU211
    Front Inter Pipe Assembly €65.84
    MSAU212
    Centre Section €266.81
    MSAU213
    LH Rear Silencer
    90mm Jet €228.70
    MSAU214
    RH Rear Silencer
    90mm Jet €228.70
    Pipe Diameter:
    2.25-inch (57.15mm)
    SUBTOTAL: €€790.04
    VAT 20%: €158.01
    TOTAL (inc. VAT): RRP €€948.05

    GB PRICE IS €758 EURO

    one thing i noticed was that the diameter of the pipe was 2.25 inches and if you look at the one for the 3.0 v6 tdi its pipe diameter is 2.75 inches, even the 1.9 is 2.5 inches, doesnt make sense to me that the 2.5 tdi would have a smaller diameter exhaust then the 1.9 also i'm not interested in doing it if i cannot get that sound [​IMG]

    any advice or input would be greatly appreciated.

    Dave
     

Share This Page