1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Milltek Erection

Discussion in 'Audi S4/A4/A4 Cab (B7 Chassis)' started by g00se, Aug 12, 2013.

  1. g00se

    g00se Active Member

    Joined:
    Nov 16, 2010
    Messages:
    268
    Likes Received:
    26
    So having spent hours and £££s fiddling around with my Milltek to get it to sit right and not stick out too much, my mechanic has had to move it back out again, as it was clashing with the billet ali brackets 034 provide with their 25mm rear ARB:-

    034 ARB fitted.jpg

    I've set it to the softer setting at the mo, which is still firmer than the 22mm RS4 bar i took off.. but i suspect i will need to upgrade the drop links before i change to the aggressive setting :rockwoot:

    I'm hoping my love for the new handling will overcome my annoyance of the erect tail pipes

    goose
     
  2. Google AdSense Guest Advertisement



    to hide this advert.
  3. ASC

    ASC Member

    Joined:
    May 3, 2010
    Messages:
    105
    Likes Received:
    20
    Ah man! Yeah mine was sitting pretty flush until I put DP's on and now it's sticking out again, PITA.. Might see about getting it modified.

    Nice ARB! :)
     
  4. S4P4UL

    S4P4UL Member

    Joined:
    Jan 29, 2013
    Messages:
    82
    Likes Received:
    8
    How much did those ARBs cost you? how much of a difference did you notice?
     
  5. g00se

    g00se Active Member

    Joined:
    Nov 16, 2010
    Messages:
    268
    Likes Received:
    26
    Eddie at WOT Motorsport sorted me out.. £250 all in (VAT, duty, delivery)

    I could have got it myself, but its such a faff paying the shipping and duty from the US.. whereas Eddie places large stocking orders and gets it al bundled-in - great guy and fast delivery.

    As for difference.. too early to tell, i only got it back yesterday arvo so i need to go find some twisties and give it the beans - should be good for some sideways fun on the ring next month :-o

    goose
     
  6. g00se

    g00se Active Member

    Joined:
    Nov 16, 2010
    Messages:
    268
    Likes Received:
    26
    I know right, bloomin annoying!

    They used to stick out about an inch (even when cold), and i much preffered when i got them flush as they didnt look so obvious and aftermarket... now they're still not as far as they were to start with, maybe only half inch.. but when they get hot they grow in length by about an inch - it's enough to make a grown man jealous lol!

    goose
     
    ASC likes this.

Share This Page