1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Milltek Cat Back Install

Discussion in 'A3/S3 Forum (8L Chassis)' started by imported_5VTurbo, Aug 19, 2004.

  1. Hi Guys
    Just installed a Cat Back Milltek system for a APR chipped S3. The it was very tight and will still need further adjustment. I seem to have picked up a lot of top end power but lost a bit of low end torque. Should I turn up the boost?
    [image]http://community.webshots.com/scripts/editPhotos.fcgi?action=showMyPhoto&albumID=176975222&photoID=176975926&security=mQsPzd[/image]
    [image]http://community.webshots.com/scripts/editPhotos.fcgi?action=showMyPhoto&albumID=176975222&photoID=176975943&security=lPrYOT[/image]
    [image]http://community.webshots.com/scripts/editPhotos.fcgi?action=showMyPhoto&albumID=176975222&photoID=176975972&security=KUVJau[/image]
    [image]http://community.webshots.com/scripts/editPhotos.fcgi?action=showMyPhoto&albumID=176975222&photoID=176975792&security=NtJUwT[/image]
    [image]http://community.webshots.com/scripts/editPhotos.fcgi?
    action=showMyPhoto&albumID=176975222&photoID=176975827&security=KZchex[/image]
    [image]http://community.webshots.com/scripts/editPhotos.fcgi?
    action=showMyPhoto&albumID=176975222&photoID=176975849&security=nIbMuI[/image]
    [image]http://community.webshots.com/scripts/editPhotos.fcgi?
    action=showMyPhoto&albumID=176975222&photoID=176975876&security=oVNGTz[/image]
    [image]http://community.webshots.com/scripts/editPhotos.fcgi?action=showMyPhoto&albumID=176975222&photoID=176975901&security=edsaCU[/image]
     
  2. Google AdSense Guest Advertisement



    to hide this advert.
  3. NWMark

    NWMark Member

    Joined:
    May 7, 2003
    Messages:
    202
    Likes Received:
    1
    links wont work anyway.

    get the message "You are not the owner of this album please log in"

    Mark
     
  4. HTC

    HTC Active Member

    Joined:
    Jan 11, 2004
    Messages:
    3,413
    Likes Received:
    0
    Upload them one by one here as we don't have access to your webshots account.
     
  5. pure

    pure Member

    Joined:
    Sep 4, 2003
    Messages:
    340
    Likes Received:
    1
    When u say "turn up the boost" how do you intend to do that, do you have an MBC fitted?
     
  6. Pure,

    via the APR V-Tuned program on a dyno. Anyway I've taken it of till then as I had lost a bit of torque low down and picked up a bit of power at higher revs.
     

Share This Page