Separate names with a comma.
Discussion in 'A3/S3 Forum (8L Chassis)' started by MIGGZ, Nov 26, 2012.
I get more of a punchy bass hey
Log in or Sign up to hide this advert.
Wow that is mos sexy ekse
Got a few things done last night, fixed my spots as they were wobbly and that, then redid the film on them as it was looking ****, fixed my cupra lip as it was pulling off, serviced my dv and got my UNITRONIC plates
Looking good bro! Where did you have them plates done?
Was done locally by my mate Barend was like R300 (£20)
Those plats are pretty epic! Aren't you worried about unwanted attention from the cops?
Lol I am so it will be for shows only lol
Ah I see, I thought you might put them on for DubRun!
Ill be looking for kak in the zero tolerance province
When you look to get rid of the 15" let me know...looks great bud, awesome job
never will my bud, was my 1st 15" DVC and has some value to me
went yesterday to AUDIO EVOLUTION to talk to them about my new install that i want to do and we going to be cracking on that after dubrun.
then went to yosh to get some stickers put on my car, i think i did a pretty good job!
anyway thats it for now lol
More pics of the whole car!!:sign_pics:
Looks good though bud
will do so this weekend lol
big thanks to Adam for sending me the audi-sport.net stickers!
Just got them, opened the envelope took a pic and ran to my car to fit them! Was very excited
Look very good Miggz. Loving the sound install!!!
Thanks my bud, very muchly appreciated
yesterday we did some cleaning and a few repairs! Dwayne had a go at the engine bay and it looks so preddy!!! put leather care on the seats and cleaned my 6pots!!!
big thanks to dwayne, breadroll(ash) and james
The elbow grease really paid off in that engine bay!!!!
it did! thanks for doing it boy
Looks like it was detailing weekend! For your birthday lol... The result is awesome though! When can I bring mine for an engine detail?
We expensive dude!! Wahahahahah
Can I pay in beers?
dwayne accepts payment of 12yr old asian strippers
is your car fwd or quattro?
them calipers look huge!
its FWD my bud, yeah its pretty big but it was designed to fit even my 16" spare wheel with no issues. Its s3 312mm disks that have been heat treated and grooved. cheaper to replace then 200quid per disk for the 330mm 2 peice disk
looking good my boy!
thanks my boy
been a busy month so far, had our annual DUBRUN and done some mods to the car.
ill start with the dubrun.
1st up its traditional that we all hook up the night before the run and tape up our cars with unique designs with blue masking tape.
now the drive down
and now the show and shine and the event on the saturday
obviously some drinking was involved the whole weekend
and then we decided to go take some photos, these are only a few will get the proper ones at a later stage
next one will be the modding and dyno run
and now the modding......
when we were down at the coast i was very interested in seeing what figures the car does down there
now reason for the run on the dyno is i live 1800m above sea level (as prawny says we are mountain goats) and i was very impressed with the figures as these are done on the wheels not on the motor so managed 230whp and 389nm
and vid of said dyno
UNITRONIC audi A3 1.8t stage 2+ dyno run at coast - YouTube
next up was fitting S2000 filter
air duct to filter (its just a temp one as i still need to do the air ducts for the brakes
drained oil and replaced it with motul gear 300 ( thanks to prawn for telling me about it, and thanks to ASH at goldwagen delarey for organizing )
and did a oil change of the motor to Motul fully synth as well
i took my 18's off and sent them in yesterday to get the stud holes drilled bigger and full refurb of them and fitted these 16's which made the car alot lower lol
next up is the stud conversion.
the reason for this is i have 4 different sets of spacers from 5mm to 20mm and 3 different sets of wheels and to carry so many different bolts for the wheels is stupid!
1st up is the stud its 90mm in total length
cleaning the stud
now to put some thread lock
fitting the stud i used 2 nuts and locked them then turned it in
with all of them done
and a 10mm spacer on
20mm spacers on the rear
and final mod so far.....
the TT shifter
now this mod is suppose to reduce throw by 20% forward and back. i dont feel to much of a difference but there is (big thanks to ash for getting me this for my bday)
remove this part its very easy just dont drop the clips as you will never find them again lol
remove nut from shifter that sits on the top (size 13) and wiggle it off
remove the link buy pulling back on the spring part
now fit new shifter
and fit back all the links
and there you go done
took a total of like 30min so very easy
Car looks so much better on the polo 16" wheelsLol...
No jokes you have been busy hey... The dubrun looks awesome and so does your car in the pics... I still can't believe the power your making!! Makes me very jealous! But I'm going for a service and remap next week, so hoping for some more horses to be released...
lmao the rims do the job! i cant wait for my 18s to come back its going to be insane!
Yeah I'm sure your going to have great stance now with the spacers! Can't wait to see how it looks!
lol and colour changed lol