1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Measurement from the rear of valve cover to firewall

Scullies Nov 26, 2012

  1. Scullies

    Scullies Well-Known Member

    Hey guys, does anyone know what the distance is from the rear of the valve cover to the firewall. I read in wellys track car build there is 10 inches from the engine block to the firewall, not sure if its the same measurement at the top.
    I am putting a tubular top mount manifold together and with the turbo fitted I have measured 9.1/4 inches. There is space to move the turbo forward by about half an inch if needed. What do you guys recommend?


    Attached Files:

Share This Page