1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

MASSIVE THANKYOU TO ADAMSS24......

Discussion in 'A4/S4 forum(B5 Chassis)' started by phoenixv6quattro, Feb 10, 2010.

  1. phoenixv6quattro
    Offline

    phoenixv6quattro staylowmovefast

    Joined:
    Sep 27, 2009
    Messages:
    1,396
    Likes Received:
    2
    [Feb 10, 2010]
    Chris(Adamss24)came and changed my timing belt,tensioners,thermostat,radiator etc etc yesterday and now after 24hrs, and a trip to London and back the cars running sweeter than ever! He did a stirling job, very professionally, in good time at a very very good price. Very nice guy too. I don't have time/tools to do the bigger jobs at the moment, and would highly reccomend his services to anyone in my boat (no time/18hr days etc). Thanks again Adam!

    Ollie
    #1
  2. Ads

    Ads

    [Oct 23, 2014]

  3. adamss24
    Offline

    adamss24 Well-Known Member

    Joined:
    Jul 3, 2007
    Messages:
    3,421
    Likes Received:
    184
    [Feb 10, 2010]
    Thank for feedback Oliver ! It was a pleasure mate !
    #2
  4. Geeman
    Offline

    Geeman Low Life

    Joined:
    Mar 19, 2009
    Messages:
    1,318
    Likes Received:
    5
    [Feb 10, 2010]
    That's good to know. Shame you're not a bit further North!
    #3
  5. rasA4
    Offline

    rasA4 Four Rings Mafia Specialist

    Joined:
    Apr 16, 2003
    Messages:
    3,103
    Likes Received:
    1
    [Feb 10, 2010]
    Where abouts are you in london Chris? PM me if you prefer
    #4
  6. Matt82
    Offline

    Matt82 Active Member

    Joined:
    Sep 7, 2009
    Messages:
    2,366
    Likes Received:
    2
    [Feb 11, 2010]
    i honestly feel the best work is carried out by enthusiasts anyway. phoenix, was the work on your v6?
    #5
  7. adamss24
    Offline

    adamss24 Well-Known Member

    Joined:
    Jul 3, 2007
    Messages:
    3,421
    Likes Received:
    184
    [Feb 11, 2010]
    Full Contitech cambelt kit (including the damper), water pump, thermostat, aux. belt, new radiator (old one was coroded at the bottom), coolant flushed and re-newed with G12 spec antifreeze. For the other punters, i am based in New Southgate, North London and i dont mind traveling a bit (for diesel money!) if within reasonable distance !
    #6
  8. phoenixv6quattro
    Offline

    phoenixv6quattro staylowmovefast

    Joined:
    Sep 27, 2009
    Messages:
    1,396
    Likes Received:
    2
    [Feb 11, 2010]
    Yes mate. Work was done on my V6....
    #7
  9. Matt82
    Offline

    Matt82 Active Member

    Joined:
    Sep 7, 2009
    Messages:
    2,366
    Likes Received:
    2
    [Feb 11, 2010]
    by no means a straight forward job adam. sounds like the same job as i did on mine in november but i did mine over a few evenings rather than just a day!!
    #8
  10. adamss24
    Offline

    adamss24 Well-Known Member

    Joined:
    Jul 3, 2007
    Messages:
    3,421
    Likes Received:
    184
    [Feb 11, 2010]
    It took 8 hours from 11 am to 7pm and there was an airlock wich took quite a while to bleed properly ! I also had a few troubles lining up the front bumper but we got there in the end ! It takes me about 6.5 hours from start to finish on a good day ! Also, the wheather did not help much...
    #9
  11. Matt82
    Offline

    Matt82 Active Member

    Joined:
    Sep 7, 2009
    Messages:
    2,366
    Likes Received:
    2
    [Feb 11, 2010]
    haha working out in the elements? we used to do stuff like that years ago, often in the dark too :p
    #10

Share This Page